User Tools

Site Tools


awstats

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
awstats [2011/03/12 03:40]
k2patel created
awstats [2017/07/02 02:16] (current)
k2patel old revision restored (2011/03/12 03:45)
Line 1: Line 1:
 ====== Awstats ====== ====== Awstats ======
 +
 +
 +==== Installing Linux ====
 +
 +<code text>
 +Modify apache httpd.conf
 +------------------------
 +export i=/​www/​apache/​conf/​httpd.conf
 +
 +#######################​
 +Check following exists
 +#######################​
 +
 +<​Directory "/​var/​www/​awstats/">​
 + ​AuthGroupFile /dev/null
 + ​AuthUserFile /​usr/​www/​virtual/​.htpasswd
 + ​AuthType Basic
 + ​AuthName "Site Statistics"​
 + <​Limit GET POST>
 +  require valid-user
 + </​Limit>​
 +</​Directory>​
 +
 +
 +    Alias /icons/ "/​www/​apache/​icons/"​
 +    Alias /cpeditor /​www/​apache/​editor
 +    Alias /​awstatsclasses "/​var/​www/​awstats/​classes/"​
 +    Alias /awstatscss "/​var/​www/​awstats/​css/"​
 +    Alias /​awstatsicons "/​var/​www/​awstats/​icons/"​
 +
 +
 +    ScriptAlias /cgi-bin/ "/​www/​apache/​cgi-bin/"​
 +    ScriptAlias /awstats/ "/​var/​www/​awstats/"​
 +
 +########################################################​
 +
 +
 +grep -vi '​^redirectpermanent /​stats'​ $i | sed '/​ServerName/​{G;​s/​ServerName \(.*\)\(\n\)/​RedirectPermanent \/stats http:​\/​\/​\1\/​awstats\/​awstats.pl?​config=\1\2ServerName \1/;}' > $i.$$ && mv -f $i $i.bak && mv -f $i.$$ $i
 +
 +
 +**************************************************************************************************************
 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 +
 +crontab
 +--------
 +
 +0 */2 * * * logrotate -f /​etc/​awstats/​awstats.logrotate >/​dev/​null 2>&1
 +
 +
 +**************************************************************************************************************
 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 +
 +
 +cat /​etc/​awstats/​awstats.logrotate
 +----------------------------------
 +
 +/​www/​logs/​*access.log
 +{
 +notifempty
 +rotate 1
 +compress
 +size 1
 +sharedscripts
 +prerotate
 +/​etc/​awstats/​awstats.new.sh
 +endscript
 +postrotate
 +/​usr/​bin/​killall -HUP httpd
 +endscript
 +}
 +
 +
 +**************************************************************************************************************
 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 +
 +cat /​etc/​awstats/​awstats.new.sh
 +-------------------------------
 +#!/bin/bash
 +
 +if [ ! -d /​etc/​awstats ]; then
 +   exit 1
 +fi
 +   
 +if [ -e /​etc/​awstats/​awstats.model.conf ]; then
 +   ​model="/​etc/​awstats/​awstats.model.conf"​
 +else
 +   cp -f /​usr/​local/​etc/​awstats.model.conf /​usr/​local/​www/​awstats/​cgi-bin/​awstats.model.conf
 +   ​model="/​usr/​local/​www/​awstats/​cgi-bin/​awstats.model.conf"​
 +fi
 +
 +if [ -e /​etc/​clusterstats ]; then
 +   ​domains=$(cat /​usr/​local/​logs/​*.site.com/​logmap | tr ' ' '​_'​ | sort | uniq)
 +else
 +   cat /​www/​apache/​conf/​httpd.conf | grep ServerName | grep ^S | awk '​{print $2, $2i"​-access.log"​}'​ > /​www/​logs/​logmap
 +   ​domains=$(tr ' ' '​_'​ < /​www/​logs/​logmap | sort | uniq)
 +fi
 +
 +for i in $domains; do
 +   ​domain=$(echo $i | cut -d '​_'​ -f 1)
 +   if [ -e /​etc/​clusterstats ]; then
 +      log="/​usr/​local/​www/​awstats/​tools/​logresolvemerge.pl /​usr/​local/​logs/​*.site.com/​$domain-access.log |"
 +   else
 +      log=/​www/​logs/​$(echo $i | cut -d '​_'​ -f 2)
 +   fi
 +   ​sedlog=$(echo "​$log"​ | sed -e '​s/​\//​\\\//​g'​)
 +
 +   mkdir -p /​www/​virtual/​stats/​$domain >/​dev/​null 2>&1
 +   sed -e "​s/​@[email protected]/​$domain/​g"​ -e "​s/​@[email protected]/​$sedlog/​g"​ $model > /​etc/​awstats/​awstats.$domain.conf
 +   /​var/​www/​awstats/​awstats.pl -config=$domain $(cat /​etc/​awstats/​options 2>/​dev/​null)
 +
 +done
 +
 +**************************************************************************************************************
 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 +
 +cat /​etc/​awstats/​awstat.model.conf
 +----------------------------------
 +
 +# AWSTATS CONFIGURE FILE 6.4
 +#​-----------------------------------------------------------------------------
 +# Copy this file into awstats.www.mydomain.conf and edit this new config file
 +# to setup AWStats (See documentation in docs/ directory).
 +# The config file must be in /​etc/​awstats,​ /​usr/​local/​etc/​awstats or /etc (for
 +# Unix/Linux) or same directory than awstats.pl (Windows, Mac, Unix/​Linux...)
 +# To include an environment variable in any parameter (AWStats will replace
 +# it with its value when reading it), follow the example:
 +# Parameter="​__ENVNAME__"​
 +# Note that environment variable AWSTATS_CURRENT_CONFIG is always defined with
 +# the config value in an AWStats running session and can be used like others.
 +#​-----------------------------------------------------------------------------
 +# $Revision: 1.310 $ - $Author: eldy $ - $Date: 2005/02/24 21:08:40 $
 +
 +
 +
 +#​-----------------------------------------------------------------------------
 +# MAIN SETUP SECTION (Required to make AWStats work)
 +#​-----------------------------------------------------------------------------
 +
 +# "​LogFile"​ contains the web, ftp or mail server log file to analyze.
 +# Possible values: A full path, or a relative path from awstats.pl directory.
 +# Example: "/​var/​log/​apache/​access.log"​
 +# Example: "​../​logs/​mycombinedlog.log"​
 +# You can also use tags in this filename if you need a dynamic file name
 +# depending on date or time (Replacement is made by AWStats at the beginning
 +# of its execution). This is available tags :
 +#   ​%YYYY-n ​ is replaced with 4 digits year we were n hours ago
 +#   ​%YY-n ​   is replaced with 2 digits year we were n hours ago
 +#   ​%MM-n ​   is replaced with 2 digits month we were n hours ago
 +#   ​%MO-n ​   is replaced with 3 letters month we were n hours ago
 +#   ​%DD-n ​   is replaced with day we were n hours ago
 +#   ​%HH-n ​   is replaced with hour we were n hours ago
 +#   ​%NS-n ​   is replaced with number of seconds at 00:00 since 1970
 +#   ​%WM-n ​   is replaced with the week number in month (1-5)
 +#   ​%Wm-n ​   is replaced with the week number in month (0-4)
 +#   ​%WY-n ​   is replaced with the week number in year (01-52)
 +#   ​%Wy-n ​   is replaced with the week number in year (00-51)
 +#   ​%DW-n ​   is replaced with the day number in week (1-7, 1=sunday)
 +#                              use n=24 if you need (1-7, 1=monday)
 +#   ​%Dw-n ​   is replaced with the day number in week (0-6, 0=sunday)
 +#                              use n=24 if you need (0-6, 0=monday)
 +#   Use 0 for n if you need current year, month, day, hour...
 +# Example: "/​var/​log/​access_log.%YYYY-0%MM-0%DD-0.log"​
 +# Example: "​C:/​WINNT/​system32/​LogFiles/​W3SVC1/​ex%YY-24%MM-24%DD-24.log"​
 +# You can also use a pipe if log file come from a pipe :
 +# Example: "gzip -d </​var/​log/​apache/​access.log.gz |"
 +# If there is several log files from load balancing servers :
 +# Example: "/​pathtotools/​logresolvemerge.pl *.log |"
 +#
 +LogFile="​@[email protected]"​
 +
 +# Enter the log file type you want to analyze.
 +# Possible values:
 +#  W - For a web log file
 +#  S - For a streaming log file
 +#  M - For a mail log file
 +#  F - For a ftp log file
 +# Example: W
 +# Default: W
 +#
 +LogType=W
 +
 +
 +# Enter here your log format (Must match your web server config. See setup
 +# instructions in documentation to know how to configure your web server to
 +# have the required log format).
 +# Possible values: 1,2,3,4 or "​your_own_personalized_log_format"​
 +# 1 - Apache or Lotus Notes/​Domino native combined log format (NCSA combined/​XLF/​ELF log format)
 +# 2 - Old IIS log format (IIS W3C log format). See FAQ for IIS 6.x.
 +# 3 - Webstar native log format.
 +# 4 - Apache or Squid native common log format (NCSA common/CLF log format)
 +#     With LogFormat=4,​ some features (browsers, os, keywords...) can't work.
 +# "​your_own_personalized_log_format"​ = If your log is ftp, mail or other format,
 +#     you must use following keys to define the log format string (See FAQ
 +#     for ftp, mail or exotic web log format examples):
 +#   ​%host ​            Host client name or IP address
 +#   ​%lognamequot ​     Authenticated login/user with format: "​john"​
 +#   ​%logname ​         Authenticated login/user with format: john
 +#   ​%time1 ​           Date and time with format: [dd/​mon/​yyyy:​hh:​mm:​ss +0000] or [dd/​mon/​yyyy:​hh:​mm:​ss]
 +#   ​%time2 ​           Date and time with format: yyyy-mm-dd hh:mm:ss
 +#   ​%time3 ​           Date and time with format: Mon dd hh:mm:ss or Mon dd hh:mm:ss yyyy
 +#   ​%time4 ​           Date and time with unix timestamp format: dddddddddd
 +#   ​%methodurl ​       Method and URL with format: "GET /index.html HTTP/​x.x"​
 +#   ​%methodurlnoprot ​ Method and URL with format: "GET /​index.html"​
 +#   ​%method ​          ​Method with format: GET
 +#   ​%url ​             URL only with format: /index.html
 +#   ​%query ​           Query string (used by URLWithQuery option)
 +#   ​%code ​            ​Return code status (with format for web log: 999)
 +#   ​%bytesd ​          Size of document in bytes
 +#   ​%refererquot ​     Referer page with format: "​http://​from.com/​from.htm"​
 +#   ​%referer ​         Referer page with format: http://​from.com/​from.htm
 +#   ​%uabracket ​       User agent with format: [Mozilla/​4.0 (compatible,​ ...)]
 +#   ​%uaquot ​          User agent with format: "​Mozilla/​4.0 (compatible,​ ...)"
 +#   ​%ua ​              User agent with format: Mozilla/​4.0_(compatible...)
 +#   ​%gzipin ​          ​mod_gzip compression input bytes: In:XXX
 +#   ​%gzipout ​         mod_gzip compression output bytes & ratio: Out:​YYY:​ZZpct.
 +#   ​%gzipratio ​       mod_gzip compression ratio: ZZpct.
 +#   ​%deflateratio ​    ​mod_deflate compression ratio with format: (ZZ)
 +#   ​%email ​           EMail sender (for mail log)
 +#   ​%email_r ​         EMail receiver (for mail log)
 +#   ​%virtualname ​     Web sever virtual hostname. Use this tag when same log
 +#                     ​contains data of several virtual web servers. AWStats
 +#                     will discard records not in SiteDomain nor HostAliases
 +#   ​%cluster ​         If log file is provided from several computers (merged by
 +#                     ​logresolvemerge.pl),​ use this to define cluster id field.
 +#   ​%extraX ​          ​Another field that you plan to use for building a
 +#                     ​personalized report with ExtraSection feature (See later).
 +#   If your log format has some fields not included in this list, use:
 +#   ​%other ​           Means another not used field
 +#   ​%otherquot ​       Means another not used double quoted field
 +#
 +# Examples for Apache combined logs (following two examples are equivalent):​
 +# LogFormat = 1
 +# LogFormat = "%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"​
 +#
 +LogFormat="​%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot"​
 +
 +
 +# If your log field'​s separator is not a space, you can change this parameter.
 +# This parameter is not used if LogFormat is a predefined value (1,2,3,4)
 +# Backslash can be used as escape character.
 +# Example: " "
 +# Example: "​\t"​
 +# Example: "​\|"​
 +# Default: " "
 +#
 +LogSeparator="​ "
 +
 +
 +# "​SiteDomain"​ must contain the main domain name, or the main intranet web
 +# server name, used to reach the web site.
 +# If you share the same log file for several virtual web servers, this
 +# parameter is used to tell AWStats to filter record that contains records for
 +# this virtual host name only (So check that this virtual hostname can be
 +# found in your log file and use a personalized log format that include the
 +# %virtualname tag).
 +# But for multi hosting a better solution is to have one log file for each
 +# virtual web server. In this case, this parameter is only used to generate
 +# full URL's links when ShowLinksOnUrl option is set to 1.
 +# If analysing mail log, enter here the domain name of mail server.
 +# Example: "​myintranetserver"​
 +# Example: "​www.domain.com"​
 +# Example: "​ftp.domain.com"​
 +# Example: "​domain.com"​
 +#
 +SiteDomain="​@[email protected]"​
 +
 +
 +# Enter here all other possible domain names, addresses or virtual host
 +# aliases someone can use to access your site. Try to keep only the minimum
 +# number of possible names/​addresses to have the best performances.
 +# You can repeat the "​SiteDomain"​ value in this list.
 +# This parameter is used to analyze referer field in log file and to help
 +# AWStats to know if a referer URL is a local URL of same site or an URL of
 +# another site.
 +# Note: Use space between each value.
 +# Note: You can use regular expression values writing value with REGEX[value].
 +# Note: You can also use @/​mypath/​myfile if list of aliases are in a file.
 +# Example: "​www.myserver.com localhost 127.0.0.1 REGEX[mydomain\.(net|org)$]"​
 +#
 +HostAliases="​@[email protected]"​
 +
 +
 +# If you want to have hosts reported by name instead of ip address, AWStats
 +# need to make reverse DNS lookups (if not already done in your log file).
 +# With DNSLookup to 0, all hosts will be reported by their IP addresses and
 +# not by the full hostname of visitors (except if names are already available
 +# in log file).
 +# If you want/need to set DNSLookup to 1, don't forget that this will reduce
 +# dramatically AWStats update process speed. Do not use on large web sites.
 +# Note: Reverse DNS lookup is done on IPv4 only (Enable ipv6 plugin for IPv6).
 +# Note: Result of DNS Lookup can be used to build the Country report. However
 +# it is highly recommanded to enable the plugin '​geoipfree'​ or '​geoip'​ to
 +# have an accurate Country report with no need of DNS Lookup.
 +# Possible values:
 +# 0 - No DNS Lookup
 +# 1 - DNS Lookup is fully enabled
 +# 2 - DNS Lookup is made only from static DNS cache file (if it exists)
 +# Default: 2
 +
 +DNSLookup=0
 +
 +
 +# When AWStats updates its statistics, it stores results of its analysis in 
 +# files (AWStats database). All those files are written in the directory
 +# defined by the "​DirData"​ parameter. Set this value to the directory where
 +# you want AWStats to save its database and working files into.
 +# Warning: If you want to be able to use the "​AllowToUpdateStatsFromBrowser"​
 +# feature (see later), you need "​Write"​ permissions by web server user on this
 +# directory (and "​Modify"​ for Windows NTFS file systems).
 +# Example: "/​var/​lib/​awstats"​
 +# Example: "​../​data"​
 +# Example: "​C:/​awstats_data_dir"​
 +# Default: "​." ​         (means same directory as awstats.pl)
 +#
 +DirData="/​usr/​www/​virtual/​stats/​@[email protected]"​
 +
 +
 +# Relative or absolute web URL of your awstats cgi-bin directory.
 +# This parameter is used only when AWStats is run from command line
 +# with -output option (to generate links in HTML reported page).
 +# Example: "/​awstats"​
 +# Default: "/​cgi-bin" ​  ​(means awstats.pl is in "/​yourwwwroot/​cgi-bin"​)
 +#
 +DirCgi="/​cgi-bin"​
 +
 +
 +# Relative or absolute web URL of your awstats icon directory.
 +# If you build static reports ("... -output > outputpath/​output.html"​),​ enter
 +# path of icon directory relative to the output directory '​outputpath'​.
 +# Example: "/​awstatsicons"​
 +# Example: "​../​icon"​
 +# Default: "/​icon"​ (means you must copy icon directories in "/​mywwwroot/​icon"​)
 +#
 +DirIcons="/​awstatsicons"​
 +
 +
 +# When this parameter is set to 1, AWStats add a button on report page to
 +# allow to "​update"​ statistics from a web browser. Warning, when "​update"​ is
 +# made from a browser, AWStats is ran as a CGI by the web server user defined
 +# in your web server (user "​nobody"​ by default with Apache, "​IUSR_XXX"​ with
 +# IIS), so the "​DirData"​ directory and all already existing history files
 +# awstatsMMYYYY[.xxx].txt must be writable by this user. Change permissions if
 +# necessary to "​Read/​Write"​ (and "​Modify"​ for Windows NTFS file systems).
 +# Warning: Update process can be long so you might experience "time out"
 +# browser errors if you don't launch AWStats enough frequently.
 +# When set to 0, update is only made when AWStats is ran from the command
 +# line interface (or a task scheduler).
 +# Possible values: 0 or 1
 +# Default: 0
 +#
 +AllowToUpdateStatsFromBrowser=0
 +
 +
 +# AWStats save and sort its database on a month basis, this allows to build
 +# build a report quickly. However, if you choose the -month=all from command
 +# line or value '​-Year-'​ from CGI combo form to have a report for all year,
 +# AWStats needs to reload all data for full year, and resort them completely,
 +# requiring a large amount of time, memory and CPU. This might be a problem
 +# for web hosting providers that offer AWStats for large sites, on shared
 +# servers, to non CPU cautious customers.
 +# For this reason, the 'full year' is only enabled on Command Line by default.
 +# You can change this by setting this parameter to 0, 1, 2 or 3.
 +# Possible values:
 +#  0 - Never allowed
 +#  1 - Allowed on CLI only, -Year- value in combo is not visible
 +#  2 - Allowed on CLI only, -Year- value in combo is visible but not allowed
 +#  3 - Possible on CLI and CGI
 +# Default: 2
 +#
 +AllowFullYearView=2
 +
 +
 +
 +#​-----------------------------------------------------------------------------
 +# OPTIONAL SETUP SECTION (Not required but increase AWStats features)
 +#​-----------------------------------------------------------------------------
 +
 +# When the update process run, AWStats can set a lock file in TEMP or TMP
 +# directory. This lock is to avoid to have 2 update processes running at the
 +# same time to prevent unknown conflicts problems and avoid DoS attacks when
 +# AllowToUpdateStatsFromBrowser is set to 1.
 +# Because, when you use lock file, you can experience sometimes problems in
 +# lock file not correctly removed (killed process for example requires that
 +# you remove the file manualy), this option is not enabled by default (Do
 +# not enable this option with no console server access).
 +# Change : Effective immediatly
 +# Possible values: 0 or 1
 +# Default: 0
 +#
 +EnableLockForUpdate=1
 +
 +
 +# AWStats can do reverse DNS lookups through a static DNS cache file that was
 +# previously created manually. If no path is given in static DNS cache file
 +# name, AWStats will search DirData directory. This file is never changed.
 +# This option is not used if DNSLookup=0.
 +# Note: DNS cache file format is '​minsince1970 ipaddress resolved_hostname'​
 +# or just '​ipaddress resolved_hostname'​
 +# Change : Effective for new updates only
 +# Example: "/​mydnscachedir/​dnscache"​
 +# Default: "​dnscache.txt"​
 +#
 +DNSStaticCacheFile="​dnscache.txt"​
 +
 +
 +# AWStats can do reverse DNS lookups through a DNS cache file that was created
 +# by a previous run of AWStats. This file is erased and recreated after each
 +# statistics update process. You don't need to create and/or edit it.
 +# AWStats will read and save this file in DirData directory.
 +# This option is used only if DNSLookup=1.
 +# Note: If a DNSStaticCacheFile is available, AWStats will check for DNS
 +# lookup in DNSLastUpdateCacheFile after checking into DNSStaticCacheFile.
 +# Change : Effective for new updates only
 +# Example: "/​mydnscachedir/​dnscachelastupdate"​
 +# Default: "​dnscachelastupdate.txt"​
 +#
 +DNSLastUpdateCacheFile="​dnscachelastupdate.txt"​
 +
 +
 +# You can specify specific IP addresses that should NOT be looked up in DNS.
 +# This option is used only if DNSLookup=1.
 +# Note: Use space between each value.
 +# Note: You can use regular expression values writing value with REGEX[value].
 +# Change : Effective for new updates only
 +# Example: "​123.123.123.123 REGEX[^192\.168\.]"​
 +# Default: ""​
 +#
 +SkipDNSLookupFor=""​
 +
 +
 +# The following two parameters allow you to protect a config file from being
 +# read by AWStats when called from a browser if web user has not been
 +# authenticated. Your AWStats program must be in a web protected "​realm"​ (With
 +# Apache, you can use .htaccess files to do so. With other web servers, see
 +# your server setup manual).
 +# Change : Effective immediatly
 +# Possible values: 0 or 1
 +# Default: 0
 +#
 +AllowAccessFromWebToAuthenticatedUsersOnly=0
 +
 +
 +# This parameter give the list of all authorized authenticated users to view
 +# statistics for this domain/​config file. This parameter is used only if
 +# AllowAccessFromWebToAuthenticatedUsersOnly is set to 1.
 +# Change : Effective immediatly
 +# Example: "user1 user2"
 +# Example: "​__REMOTE_USER__"​
 +# Default: ""​
 +#
 +AllowAccessFromWebToFollowingAuthenticatedUsers=""​
 +
 +
 +# When this parameter is define to something, the IP address of the user that
 +# read its statistics from a browser (when AWStats is used as a CGI) is
 +# checked and must match one of the IP address values or ranges.
 +# Change : Effective immediatly
 +# Example: "​127.0.0.1 123.123.123.1-123.123.123.255"​
 +# Default: ""​
 +#
 +AllowAccessFromWebToFollowingIPAddresses=""​
 +
 +
 +# If the "​DirData"​ directory (see above) does not exists, AWStats return an
 +# error. However, you can ask AWStats to create it.
 +# This option can be used by some Web Hosting Providers that has defined a 
 +# dynamic value for DirData (for example DirData="/​home/​__REMOTE_USER__"​) and
 +# don't want to have to create a new directory each time they add a new user.
 +# Change : Effective immediatly
 +# Possible values: 0 or 1
 +# Default: 0
 +#
 +CreateDirDataIfNotExists=0
 +
 +
 +# You can choose in which format the Awstats history database is saved.
 +# Note: Using "​xml"​ format make AWStats building database files three times
 +# larger than using "​text"​ format.
 +# Change : Database format is switched after next update
 +# Possible values: text or xml
 +# Default: text
 +#
 +BuildHistoryFormat=text
 +
 +
 +# If you prefer having the report output pages be built as XML compliant pages
 +# instead of simple HTML pages, you can set this to '​xhtml'​ (May not works
 +# properly with old browsers).
 +# Change : Effective immediatly
 +# Possible values: html or xhtml
 +# Default: html
 +#
 +BuildReportFormat=html
 +
 +
 +# AWStats databases can be updated from command line of from a browser (when
 +# used as a cgi program). So AWStats database files need write permission
 +# for both command line user and default web server user (nobody for Unix,
 +# IUSR_xxx for IIS/​Windows,​...).
 +# To avoid permission'​s problems between update process (run by an admin user)
 +# and CGI process (ran by a low level user), AWStats can save its database ​
 +# files with read and write permissions for everyone.
 +# By default, AWStats keep default user permissions on updated files. If you 
 +# set AllowToUpdateStatsFromBrowser to 1, you can change this parameter to 1.
 +# Change : Effective for new updates only
 +# Possible values: 0 or 1
 +# Default: 0
 +#
 +SaveDatabaseFilesWithPermissionsForEveryone=0
 +
 +
 +# AWStats can purge log file, after analyzing it. Note that AWStats is able
 +# to detect new lines in a log file, to process only them, so you can launch
 +# AWStats as often as you want, even with this parameter to 0.
 +# With 0, no purge is made, so you must use a scheduled task or a web server
 +# that make this purge frequently.
 +# With 1, the purge of the log file is made each time AWStats update is ran.
 +# This parameter doesn'​t work with IIS (This web server doesn'​t let its log
 +# file to be purged).
 +# Change : Effective for new updates only
 +# Possible values: 0 or 1
 +# Default: 0
 +#
 +PurgeLogFile=0
 +
 +
 +# When PurgeLogFile is setup to 1, AWStats will clean your log file after
 +# processing it. You can however keep an archive file of all processed log
 +# records by setting this parameter (For example if you want to use another
 +# log analyzer). The archived log file is saved in "​DirData"​ with name
 +# awstats_archive.configname[.suffix].log
 +# This parameter is not used if PurgeLogFile=0
 +# Change : Effective for new updates only
 +# Possible values: 0, 1, or tags (See LogFile parameter) for suffix
 +# Example: 1
 +# Example: %YYYY%MM%DD
 +# Default: 0
 +#
 +ArchiveLogRecords=0
 +
 +
 +# Each time you run the update process, AWStats overwrite the '​historic file'
 +# for the month (awstatsMMYYYY[.*].txt) with the updated one.
 +# When write errors occurs (IO, disk full,...), this historic file can be
 +# corrupted and must be deleted. Because this file contains information of all
 +# past processed log files, you will loose old stats if removed. So you can
 +# ask AWStats to save last non corrupted file in a .bak file. This file is
 +# stored in "​DirData"​ directory with other '​historic files'​.
 +# Change : Effective for new updates only
 +# Possible values: 0 or 1
 +# Default: 0
 +#
 +KeepBackupOfHistoricFiles=0
 +
 +
 +# Default index page name for your web server.
 +# Change : Effective for new updates only
 +# Example: "​index.php index.html default.html"​
 +# Default: "​index.html"​
 +#
 +DefaultFile="​index.html index.htm index.php index.shtml index.cgi index.pl default.htm default.html default.php default.shtml default.cgi default.pl"​
 +
 +
 +# Do not include access from clients that match following criteria.
 +# If your log file contains IP adresses in host field, you must enter here
 +# matching IP adresses criteria.
 +# If DNS lookup is already done in your log file, you must enter here hostname
 +# criteria, else enter ip address criteria.
 +# The opposite parameter of "​SkipHosts"​ is "​OnlyHosts"​.
 +# Note: Use space between each value. This parameter is not case sensitive.
 +# Note: You can use regular expression values writing value with REGEX[value].
 +# Change : Effective for new updates only
 +# Example: "​127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"​
 +# Example: "​localhost REGEX[^.*\.localdomain$]"​
 +# Default: ""​
 +#
 +SkipHosts=""​
 +
 +
 +# Do not include access from clients with a user agent that match following
 +# criteria. If you want to exclude a robot, you should update the robots.pm
 +# file instead of this parameter.
 +# The opposite parameter of "​SkipUserAgents"​ is "​OnlyUserAgents"​.
 +# Note: Use space between each value. This parameter is not case sensitive.
 +# Note: You can use regular expression values writing value with REGEX[value].
 +# Change : Effective for new updates only
 +# Example: "​konqueror REGEX[ua_test_v\d\.\d]"​
 +# Default: ""​
 +#
 +SkipUserAgents=""​
 +
 +
 +# Use SkipFiles to ignore access to URLs that match one of following entries.
 +# You can enter a list of not important URLs (like framed menus, hidden pages,
 +# etc...) to exclude them from statistics. You must enter here exact relative
 +# URL as found in log file, or a matching REGEX value.
 +# For example, to ignore /​badpage.html,​ just add "/​badpage.html"​. To ignore
 +# all pages in a particular directory, add "​REGEX[^\/​directorytoexclude]"​.
 +# The opposite parameter of "​SkipFiles"​ is "​OnlyFiles"​.
 +# Note: Use space between each value. This parameter is or not case sensitive
 +# depending on URLNotCaseSensitive parameter.
 +# Note: You can use regular expression values writing value with REGEX[value].
 +# Change : Effective for new updates only
 +# Example: "/​badpage.html REGEX[^\/​excludedirectory]"​
 +# Default: ""​
 +#
 +SkipFiles=""​
 +
 +
 +# Include in stats, only accesses from hosts that match one of following
 +# entries. For example, if you want AWStats to filter access to keep only
 +# stats for visits from particular hosts, you can add those hosts names in
 +# this parameter.
 +# If DNS lookup is already done in your log file, you must enter here hostname
 +# criteria, else enter ip address criteria.
 +# The opposite parameter of "​OnlyHosts"​ is "​SkipHosts"​.
 +# Note: Use space between each value. This parameter is not case sensitive.
 +# Note: You can use regular expression values writing value with REGEX[value].
 +# Change : Effective for new updates only
 +# Example: "​127.0.0.1 REGEX[^192\.168\.] REGEX[^10\.]"​
 +# Default: ""​
 +#
 +OnlyHosts=""​
 +
 +
 +# Include in stats, only accesses from user agent that match one of following
 +# entries. For example, if you want AWStats to filter access to keep only
 +# stats for visits from particular browsers, you can add their user agents
 +# string in this parameter.
 +# The opposite parameter of "​OnlyUserAgents"​ is "​SkipUserAgents"​.
 +# Note: Use space between each value. This parameter is not case sensitive.
 +# Note: You can use regular expression values writing value with REGEX[value].
 +# Change : Effective for new updates only
 +# Example: "​msie"​
 +# Default: ""​
 +#
 +OnlyUserAgents=""​
 +
 +
 +# Include in stats, only accesses to URLs that match one of following entries.
 +# For example, if you want AWStats to filter access to keep only stats that
 +# match a particular string, like a particular directory, you can add this
 +# directory name in this parameter.
 +# The opposite parameter of "​OnlyFiles"​ is "​SkipFiles"​.
 +# Note: Use space between each value. This parameter is or not case sensitive
 +# depending on URLNotCaseSensitive parameter.
 +# Note: You can use regular expression values writing value with REGEX[value].
 +# Change : Effective for new updates only
 +# Example: "​REGEX[marketing_directory] REGEX[office\/​.*\.(csv|sxw)$]"​
 +# Default: ""​
 +#
 +OnlyFiles=""​
 +
 +
 +# Add here a list of kind of url (file extension) that must be counted as
 +# "Hit only" and not as a "​Hit"​ and "​Page/​Download"​. You can set here all
 +# images extensions as they are hit downloaded that must be counted but they
 +# are not viewed pages. URLs with such extensions are not included in the TOP
 +# Pages/URL report.
 +# Note: If you want to exclude particular URLs from stats (No Pages and no
 +# Hits reported), you must use SkipFiles parameter.
 +# Change : Effective for new updates only
 +# Example: "css js class gif jpg jpeg png bmp ico zip arj gz z wav mp3 wma mpg"
 +# Example: ""​
 +# Default: "css js class gif jpg jpeg png bmp ico"
 +#
 +NotPageList="​css js class gif jpg jpeg png bmp ico swf"
 +
 +
 +# By default, AWStats considers that records found in web log file are
 +# successful hits if HTTP code returned by server is a valid HTTP code (200
 +# and 304). Any other code are reported in HTTP status chart.
 +# Note that HTTP '​control codes',​ like redirection (302, 305) are not added by
 +# default in this list as they are not pages seen by a visitor but are
 +# protocol exchange codes to tell the browser to ask another page. Because
 +# this other page will be counted and seen with a 200 or 304 code, if you 
 +# add such codes, you will have 2 pages viewed reported for only one in facts.
 +# Change : Effective for new updates only
 +# Example: "200 304 302 305"
 +# Default: "200 304"
 +#
 +ValidHTTPCodes="​200 304"
 +
 +
 +# By default, AWStats considers that records found in mail log file are
 +# successful mail transfers if field that represent return code in analyzed
 +# log file match values defined by this parameter.
 +# Change : Effective for new updates only
 +# Example: "1 250 200"
 +# Default: "1 250"
 +#
 +ValidSMTPCodes="​1 250"
 +
 +
 +# Some web servers on some Operating systems (IIS-Windows) considers that a
 +# login with same value but different case are the same login. To tell AWStats
 +# to also considers them as one, set this parameter to 1.
 +# Change : Effective for new updates only
 +# Possible values: 0 or 1
 +# Default: 0
 +
 +AuthenticatedUsersNotCaseSensitive=0
 +
 +
 +# Some web servers on some Operating systems (IIS-Windows) considers that two
 +# URLs with same value but different case are the same URL. To tell AWStats to
 +# also considers them as one, set this parameter to 1.
 +# Change : Effective for new updates only
 +# Possible values: 0 or 1
 +# Default: 0
 +
 +URLNotCaseSensitive=0
 +
 +
 +# Keep or remove the anchor string you can find in some URLs.
 +# Change : Effective for new updates only
 +# Possible values: 0 or 1
 +# Default: 0
 +#
 +URLWithAnchor=0
 +
 +
 +# In URL links, "?"​ char is used to add parameter'​s list in URLs. Syntax is:
 +# /​mypage.html?​param1=value1&​param2=value2
 +# However, some servers/​sites use also others chars to isolate dynamic part of
 +# their URLs. You can complete this list with all such characters.
 +# Change : Effective for new updates only
 +# Example: "?;,"​
 +# Default: "?;"​
 +#
 +URLQuerySeparators="?;"​
 +
 +
 +# Keep or remove the query string to the URL in the statistics for individual
 +# pages. This is primarily used to differentiate between the URLs of dynamic
 +# pages. If set to 1, mypage.html?​id=x and mypage.html?​id=y are counted as two
 +# different pages.
 +# Warning, when set to 1, memory required to run AWStats is dramatically
 +# increased if you have a lot of changing URLs (for example URLs with a random
 +# id inside). Such web sites should not set this option to 1 or use seriously
 +# the next parameter URLWithQueryWithOnlyFollowingParameters (or eventually ​
 +# URLWithQueryWithoutFollowingParameters).
 +# Change : Effective for new updates only
 +# Possible values:
 +# 0 - URLs are cleaned from the query string (ie: "/​mypage.html"​)
 +# 1 - Full URL with query string is used     (ie: "/​mypage.html?​p=x&​q=y"​)
 +# Default: 0
 +
 +URLWithQuery=0
 +
 +
 +# When URLWithQuery is on, you will get the full URL with all parameters in
 +# URL reports. But among thoose parameters, sometimes you don't need a
 +# particular parameter because it does not identify the page or because it's
 +# a random ID changing for each access even if URL points to same page. In
 +# such cases, it is higly recommanded to ask AWStats to keep only parameters
 +# you need (if you know them) before counting, manipulating and storing URL.
 +# Enter here list of wanted parameters. For example, with "​param",​ one hit on
 +# /​mypage.cgi?​param=abc&​id=Yo4UomP9d ​ and  /​mypage.cgi?​param=abc&​id=Mu8fdxl3r
 +# will be reported as 2 hits on /​mypage.cgi?​param=abc
 +# This parameter is not used when URLWithQuery is 0 and can't be used with
 +# URLWithQueryWithoutFollowingParameters.
 +# Change : Effective for new updates only
 +# Example: "​param"​
 +# Default: ""​
 +
 +URLWithQueryWithOnlyFollowingParameters=""​
 +
 +
 +# When URLWithQuery is on, you will get the full URL with all parameters in
 +# URL reports. But among thoose parameters, sometimes you don't need a
 +# particular parameter because it does not identify the page or because it's
 +# a random ID changing for each access even if URL points to same page. In
 +# such cases, it is higly recommanded to ask AWStats to remove such parameters
 +# from the URL before counting, manipulating and storing URL. Enter here list
 +# of all non wanted parameters. For example if you enter "​id",​ one hit on
 +# /​mypage.cgi?​param=abc&​id=Yo4UomP9d ​ and  /​mypage.cgi?​param=abc&​id=Mu8fdxl3r
 +# will be reported as 2 hits on /​mypage.cgi?​param=abc
 +# This parameter is not used when URLWithQuery is 0 and can't be used with
 +# URLWithQueryWithOnlyFollowingParameters.
 +# Change : Effective for new updates only
 +# Example: "​PHPSESSID jsessionid"​
 +# Default: ""​
 +
 +URLWithQueryWithoutFollowingParameters=""​
 +
 +
 +# Keep or remove the query string to the referrer URL in the statistics for
 +# external referrer pages. This is used to differentiate between the URLs of
 +# dynamic referrer pages. If set to 1, mypage.html?​id=x and mypage.html?​id=y
 +# are counted as two different referrer pages.
 +# Change : Effective for new updates only
 +# Possible values:
 +# 0 - Referrer URLs are cleaned from the query string (ie: "/​mypage.html"​)
 +# 1 - Full URL with query string is used      (ie: "/​mypage.html?​p=x&​q=y"​)
 +# Default: 0
 +
 +URLReferrerWithQuery=0
 +
 +
 +# AWStats can detect setup problems or show you important informations to have
 +# a better use. Keep this to 1, except if AWStats says you can change it.
 +# Change : Effective immediatly
 +# Possible values: 0 or 1
 +# Default: 1
 +#
 +WarningMessages=1
 +
 +
 +# When an error occurs, AWStats output a message related to errors. If you
 +# want (in most cases for security reasons) to have no error messages, you
 +# can set this parameter to your personalized generic message.
 +# Change : Effective immediatly
 +# Example: "An error occured. Contact your Administrator"​
 +# Default: ""​
 +#
 +ErrorMessages=""​
 +
 +
 +# AWStat can be run with debug=x parameter to output various informations
 +# to help in debugging or solving troubles. If you want to allow this (not
 +# enabled by default for security reasons), set this parameter to 0.
 +# Change : Effective immediatly
 +# Possible values: 0 or 1
 +# Default: 0
 +#
 +DebugMessages=0
 +
 +
 +# To help you to detect if your log format is good, AWStats report an error
 +# if all the first NbOfLinesForCorruptedLog lines have a format that does not
 +# match the LogFormat parameter.
 +# However, some worm virus attack on your web server can result in a very high
 +# number of corrupted lines in your log. So if you experience awstats stop
 +# because of bad virus records at the beginning of your log file, you can
 +# increase this parameter (very rare).
 +# Change : Effective for new updates only
 +# Default: 50
 +#
 +NbOfLinesForCorruptedLog=50
 +
 +
 +# For some particular integration needs, you may want to have CGI links to
 +# point to another script than awstats.pl.
 +# Use the name of this script in WrapperScript parameter.
 +# Change : Effective immediatly
 +# Example: "​awstatslauncher.pl"​
 +# Default: ""​
 +#
 +WrapperScript=""​
 +
 +
 +# DecodeUA must be set to 1 if you use Roxen web server. This server converts
 +# all spaces in user agent field into %20. This make the AWStats robots, os
 +# and browsers detection fail in some cases. Just change it to 1 if and only
 +# if your web server is Roxen.
 +# Change : Effective for new updates only
 +# Possible values: 0 or 1
 +# Default: 0
 +#
 +DecodeUA=0
 +
 +
 +# MiscTrackerUrl can be used to make AWStats able to detect some miscellanous
 +# things, that can not be tracked on other way, like:
 +# - Javascript disabled
 +# - Java enabled
 +# - Screen size
 +# - Color depth
 +# - Macromedia Director plugin
 +# - Macromedia Shockwave plugin
 +# - Realplayer G2 plugin
 +# - QuickTime plugin
 +# - Mediaplayer plugin
 +# - Acrobat PDF plugin
 +# To enable all this features, you must copy the awstats_misc_tracker.js file
 +# into a /js/ directory stored in your web document root and add the following
 +# HTML code at the end of your index page (but before </​BODY>​) :
 +#
 +# <script language=javascript src="/​js/​awstats_misc_tracker.js"></​script>​
 +# <​noscript><​img src="/​js/​awstats_misc_tracker.js?​nojs=y"​ height=0 width=0 border=0 style="​display:​ none"></​noscript>​
 +#
 +# If code is not added in index page, all those detection capabilities will be
 +# disabled. You must also check that ShowScreenSizeStats and ShowMiscStats
 +# parameters are set to 1 to make results appear in AWStats report page.
 +# If you want to use another directory than /js/, you must also change the
 +# awstatsmisctrackerurl variable into the awstats_misc_tracker.js file.
 +# Change : Effective for new updates only.
 +# Possible value: URL of javascript tracker file added in your HTML code.
 +# Default: "/​js/​awstats_misc_tracker.js"​
 +#
 +MiscTrackerUrl="/​js/​awstats_misc_tracker.js"​
 +
 +
 +
 +#​-----------------------------------------------------------------------------
 +# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
 +#​-----------------------------------------------------------------------------
 +
 +# Following values allows you to define accuracy of AWStats entities (robots,
 +# browsers, os, referers, file types) detection.
 +# It might be a good idea for large web sites or ISP that provides AWStats to
 +# high number of customers, to set this parameter to 1 (or 0), instead of 2.
 +# Possible values:
 +#  0 = No detection,
 +#  1 = Medium/​Standard detection
 +#  2 = Full detection
 +# Change : Effective for new updates only
 +# Default: 2 (0 for LevelForWormsDetection)
 +#
 +LevelForBrowsersDetection=2 ​        # 0 disables Browsers detection.
 +                                    # 2 reduces AWStats speed by 2%
 +LevelForOSDetection=2 ​              # 0 disables OS detection.
 +                                    # 2 reduces AWStats speed by 3%
 +LevelForRefererAnalyze=2 ​           # 0 disables Origin detection.
 +                                    # 2 reduces AWStats speed by 14%
 +LevelForRobotsDetection=2 ​          # 0 disables Robots detection.
 +                                    # 2 reduces AWStats speed by 2.5%
 +LevelForSearchEnginesDetection=2 ​   # 0 disables Search engines detection.
 +                                    # 2 reduces AWStats speed by 9%
 +LevelForKeywordsDetection=2 ​        # 0 disables Keyphrases/​Keywords detection.
 +                                    # 2 reduces AWStats speed by 1%
 +LevelForFileTypesDetection=2 ​       # 0 disables File types detection.
 +                                    # 2 reduces AWStats speed by 1%
 +LevelForWormsDetection=0 ​           # 0 disables Worms detection.
 +                                    # 2 reduces AWStats speed by 15%
 +
 +
 +
 +#​-----------------------------------------------------------------------------
 +# OPTIONAL APPEARANCE SETUP SECTION (Not required but increase AWStats features)
 +#​-----------------------------------------------------------------------------
 +
 +# When you use AWStats as a CGI, you can have the reports shown in HTML frames.
 +# Frames are only available for report viewed dynamically. When you build
 +# pages from command line, this option is not used and no frames are built.
 +# Possible values: 0 or 1
 +# Default: 1
 +#
 +UseFramesWhenCGI=1
 +
 +
 +# This parameter ask your browser to open detailed reports into a different
 +# window than the main page.
 +# Possible values:
 +# 0 - Open all in same browser window
 +# 1 - Open detailed reports in another window except if using frames
 +# 2 - Open always in a different window even if reports are framed
 +# Default: 1
 +#
 +DetailedReportsOnNewWindows=1
 +
 +
 +# You can add, in the HTML report page, a cache lifetime (in seconds) that
 +# will be returned to browser in HTTP header answer by server.
 +# This parameter is not used when report are built with -staticlinks option.
 +# Example: 3600
 +# Default: 0
 +#
 +Expires=0
 +
 +
 +# To avoid too large web pages, you can ask AWStats to limit number of rows of
 +# all reported charts to this number when no other limit apply.
 +# Default: 1000
 +#
 +MaxRowsInHTMLOutput=1000
 +
 +
 +# Set your primary language (ISO-639-1 language codes).
 +# Possible value:
 +#  Albanian=al,​ Bosnian=ba, Bulgarian=bg,​ Catalan=ca,
 +#  Chinese (Taiwan)=tw,​ Chinese (Simpliefied)=cn,​ Czech=cz, Danish=dk,
 +#  Dutch=nl, English=en, Estonian=et,​ Euskara=eu, Finnish=fi,
 +#  French=fr, Galician=gl,​ German=de, Greek=gr, Hebrew=he, Hungarian=hu,​
 +#  Icelandic=is,​ Indonesian=id,​ Italian=it, Japanese=jp,​ Korean=kr,
 +#  Latvian=lv, Norwegian (Nynorsk)=nn,​ Norwegian (Bokmal)=nb,​ Polish=pl,
 +#  Portuguese=pt,​ Portuguese (Brazilian)=br,​ Romanian=ro,​ Russian=ru,
 +#  Serbian=sr, Slovak=sk, Slovenian=si,​ Spanish=es, Swedish=se, Turkish=tr,
 +#  Ukrainian=ua,​ Welsh=cy.
 +#  First available language accepted by browser=auto
 +# Default: "​auto"​
 +#
 +Lang="​auto"​
 +
 +
 +# Set the location of language files.
 +# Example: "/​usr/​share/​awstats/​lang"​
 +# Default: "​./​lang"​ (means lang directory is in same location than awstats.pl)
 +#
 +DirLang="​./​lang"​
 +
 +
 +# Show menu header with reports'​ links
 +# Possible values: 0 or 1
 +# Default: 1
 +#
 +ShowMenu=1
 +
 +
 +# You choose here which reports you want to see in the main page and what you
 +# want to see in those reports.
 +# Possible values:
 +#  0  - Report is not shown at all
 +#  1  - Report is shown in main page with an entry in menu and default columns
 +# XYZ - Report shows column informations defined by code X,Y,Z...
 +#       ​X,​Y,​Z... are code letters among the following:
 +#        U = Unique visitors
 +#        V = Visits
 +#        P = Number of pages
 +#        H = Number of hits (or mails)
 +#        B = Bandwith (or total mail size for mail logs)
 +#        L = Last access date
 +#        E = Entry pages
 +#        X = Exit pages
 +#        C = Web compression (mod_gzip,​mod_deflate)
 +#        M = Average mail size (mail logs)
 +#
 +
 +# Show monthly summary
 +# Context: Web, Streaming, Mail, Ftp
 +# Default: UVPHB, Possible column codes: UVPHB
 +ShowSummary=UVPHB
 +
 +# Show monthly chart
 +# Context: Web, Streaming, Mail, Ftp
 +# Default: UVPHB, Possible column codes: UVPHB
 +ShowMonthStats=UVPHB
 +
 +# Show days of month chart
 +# Context: Web, Streaming, Mail, Ftp
 +# Default: VPHB, Possible column codes: VPHB
 +ShowDaysOfMonthStats=VPHB
 +
 +# Show days of week chart
 +# Context: Web, Streaming, Mail, Ftp
 +# Default: PHB, Possible column codes: PHB
 +ShowDaysOfWeekStats=PHB
 +
 +# Show hourly chart
 +# Context: Web, Streaming, Mail, Ftp
 +# Default: PHB, Possible column codes: PHB
 +ShowHoursStats=PHB
 +
 +# Show domains/​country chart
 +# Context: Web, Streaming, Mail, Ftp
 +# Default: PHB, Possible column codes: PHB
 +ShowDomainsStats=PHB
 +
 +# Show hosts chart
 +# Context: Web, Streaming, Mail, Ftp
 +# Default: PHBL, Possible column codes: PHBL
 +ShowHostsStats=PHBL
 +
 +# Show authenticated users chart
 +# Context: Web, Streaming, Ftp
 +# Default: 0, Possible column codes: PHBL
 +ShowAuthenticatedUsers=1
 +
 +# Show robots chart
 +# Context: Web, Streaming
 +# Default: HBL, Possible column codes: HBL
 +ShowRobotsStats=HBL
 +
 +# Show worms chart
 +# Context: Web, Streaming
 +# Default: 0 (If set to other than 0, see also LevelForWormsDetection),​ Possible column codes: HBL
 +ShowWormsStats=0
 +
 +# Show email senders chart (For use when analyzing mail log files)
 +# Context: Mail
 +# Default: 0, Possible column codes: HBML
 +ShowEMailSenders=0
 +
 +# Show email receivers chart (For use when analyzing mail log files)
 +# Context: Mail
 +# Default: 0, Possible column codes: HBML
 +ShowEMailReceivers=0
 +
 +# Show session chart
 +# Context: Web, Streaming, Ftp
 +# Default: 1, Possible column codes: None
 +ShowSessionsStats=1
 +
 +# Show pages-url chart.
 +# Context: Web, Streaming, Ftp
 +# Default: PBEX, Possible column codes: PBEX
 +ShowPagesStats=PBEX
 +
 +# Show file types chart.
 +# Context: Web, Streaming, Ftp
 +# Default: HB, Possible column codes: HBC
 +ShowFileTypesStats=HB
 +
 +# Show file size chart (Not yet available)
 +# Context: Web, Streaming, Mail, Ftp
 +# Default: 1, Possible column codes: None
 +ShowFileSizesStats=0
 +
 +# Show operating systems chart
 +# Context: Web, Streaming, Ftp
 +# Default: 1, Possible column codes: None
 +ShowOSStats=1
 +
 +# Show browsers chart
 +# Context: Web, Streaming
 +# Default: 1, Possible column codes: None
 +ShowBrowsersStats=1
 +
 +# Show screen size chart
 +# Context: Web, Streaming
 +# Default: 0 (If set to 1, see also MiscTrackerUrl),​ Possible column codes: None
 +ShowScreenSizeStats=0
 +
 +# Show origin chart
 +# Context: Web, Streaming
 +# Default: PH, Possible column codes: PH
 +ShowOriginStats=PH
 +
 +# Show keyphrases chart
 +# Context: Web, Streaming
 +# Default: 1, Possible column codes: None
 +ShowKeyphrasesStats=1
 +
 +# Show keywords chart
 +# Context: Web, Streaming
 +# Default: 1, Possible column codes: None
 +ShowKeywordsStats=1
 +
 +# Show misc chart
 +# Context: Web, Streaming
 +# Default: a (See also MiscTrackerUrl parameter), Possible column codes: anjdfrqwp
 +ShowMiscStats=a
 +
 +# Show http errors chart
 +# Context: Web, Streaming
 +# Default: 1, Possible column codes: None
 +ShowHTTPErrorsStats=1
 +
 +# Show smtp errors chart (For use when analyzing mail log files)
 +# Context: Mail
 +# Default: 0, Possible column codes: None
 +ShowSMTPErrorsStats=0
 +
 +# Show the cluster report (Your LogFormat must contains the %cluster tag)
 +# Context: Web, Streaming, Ftp
 +# Default: 0, Possible column codes: PHB
 +ShowClusterStats=0
 +
 +
 +# Some graphical reports are followed by the data array of values.
 +# If you don't want this array (to reduce report size for example), you can
 +# set thoose options to 0.
 +# Possible values: 0 or 1
 +# Default: 1
 +#
 +# Data array values for the ShowMonthStats report
 +AddDataArrayMonthStats=1
 +# Data array values for the ShowDaysOfMonthStats report
 +AddDataArrayShowDaysOfMonthStats=1
 +# Data array values for the ShowDaysOfWeekStats report
 +AddDataArrayShowDaysOfWeekStats=1
 +# Data array values for the ShowHoursStats report
 +AddDataArrayShowHoursStats=1
 +
 +
 +# In the Origin chart, you have stats on where your hits came from. You can
 +# includes hits on pages that comes from pages of same sites in this chart.
 +# Possible values: 0 or 1
 +# Default: 0
 +#
 +IncludeInternalLinksInOriginSection=0
 +
 +
 +# Following parameter can be used to choose maximum number of lines shown for
 +# the particular following report.
 +#
 +# Stats by countries/​domains
 +MaxNbOfDomain = 10
 +MinHitDomain ​ = 1
 +# Stats by hosts
 +MaxNbOfHostsShown = 10
 +MinHitHost ​   = 1
 +# Stats by authenticated users
 +MaxNbOfLoginShown = 10
 +MinHitLogin ​  = 1
 +# Stats by robots
 +MaxNbOfRobotShown = 10
 +MinHitRobot ​  = 1
 +# Stats by pages
 +MaxNbOfPageShown = 10
 +MinHitFile ​   = 1
 +# Stats by OS
 +MaxNbOfOsShown = 10
 +MinHitOs ​     = 1
 +# Stats by browsers
 +MaxNbOfBrowsersShown = 10
 +MinHitBrowser = 1
 +# Stats by screen size
 +MaxNbOfScreenSizesShown = 5
 +MinHitScreenSize = 1
 +# Stats by window size (following 2 parameters are not yet used)
 +MaxNbOfWindowSizesShown = 5
 +MinHitWindowSize = 1
 +# Stats by referers
 +MaxNbOfRefererShown = 10
 +MinHitRefer ​  = 1
 +# Stats for keyphrases
 +MaxNbOfKeyphrasesShown = 10
 +MinHitKeyphrase = 1
 +# Stats for keywords
 +MaxNbOfKeywordsShown = 10
 +MinHitKeyword = 1
 +# Stats for sender or receiver emails
 +MaxNbOfEMailsShown = 20
 +MinHitEMail ​  = 1
 +
 +
 +# Choose if you want the week report to start on sunday or monday
 +# Possible values:
 +# 0 - Week start on sunday
 +# 1 - Week start on monday
 +# Default: 1
 +#
 +FirstDayOfWeek=1
 +
 +
 +# List of visible flags that links to other language translations.
 +# See Lang parameter for list of allowed flag/​language codes.
 +# If you don't want any flag link, set ShowFlagLinks to ""​.
 +# This parameter is used only if ShowMenu parameter is set to 1.
 +# Possible values: ""​ or "​language_codes_separated_by_space"​
 +# Example: "en es fr nl de"
 +# Default: ""​
 +#
 +ShowFlagLinks=""​
 +
 +
 +# Each URL, shown in stats report views, are links you can click.
 +# Possible values: 0 or 1
 +# Default: 1
 +#
 +ShowLinksOnUrl=1
 +
 +
 +# When AWStats build HTML links in its report pages, it starts thoose link
 +# with "​http://"​. However some links might be HTTPS links, so you can enter
 +# here the root of all your HTTPS links. If all your site is a SSL web site,
 +# just enter "/"​.
 +# This parameter is not used if ShowLinksOnUrl is 0.
 +# Example: "/​shopping"​
 +# Example: "/"​
 +# Default: ""​
 +#
 +UseHTTPSLinkForUrl=""​
 +
 +
 +# Maximum length of URL part shown on stats page (number of characters).
 +# This affects only URL visible text, link still work.
 +# Default: 64
 +#
 +MaxLengthOfShownURL=64
 +
 +
 +# You can enter HTML code that will be added at the top of AWStats reports.
 +# Default: ""​
 +#
 +HTMLHeadSection=""​
 +
 +
 +# You can enter HTML code that will be added at the end of AWStats reports.
 +# Great to add advert ban.
 +# Default: ""​
 +#
 +HTMLEndSection=""​
 +
 +
 +# You can set Logo and LogoLink to use your own logo.
 +# Logo must be the name of image file (must be in $DirIcons/​other directory).
 +# LogoLink is the expected URL when clicking on Logo.
 +# Default: "​awstats_logo6.png"​
 +#
 +Logo="​awstats_logo6.png"​
 +LogoLink="​http://​awstats.sourceforge.net"​
 +
 +
 +# Value of maximum bar width/​height for horizontal/​vertical HTML graphics bar.
 +# Default: 260/90
 +#
 +BarWidth ​  = 260
 +BarHeight ​ = 90
 +
 +
 +# You can ask AWStats to use a particular CSS (Cascading Style Sheet) to
 +# change its look. To create a style sheet, you can use samples provided with
 +# AWStats in wwwroot/css directory.
 +# Example: "/​awstatscss/​awstats_bw.css"​
 +# Example: "/​css/​awstats_bw.css"​
 +# Default: ""​
 +#
 +StyleSheet=""​
 +
 +
 +# Those colors parameters can be used (if StyleSheet parameter is not used)
 +# to change AWStats look.
 +# Example: color_name="​RRGGBB"​ #​ RRGGBB is Red Green Blue components in Hex
 +#
 +color_Background="​FFFFFF"​ #​ Background color for main page (Default = "​FFFFFF"​)
 +color_TableBGTitle="​CCCCDD"​ #​ Background color for table title (Default = "​CCCCDD"​)
 +color_TableTitle="​000000"​ #​ Table title font color (Default = "​000000"​)
 +color_TableBG="​CCCCDD"​ #​ Background color for table (Default = "​CCCCDD"​)
 +color_TableRowTitle="​FFFFFF"​ #​ Table row title font color (Default = "​FFFFFF"​)
 +color_TableBGRowTitle="​ECECEC"​ #​ Background color for row title (Default = "​ECECEC"​)
 +color_TableBorder="​ECECEC"​ #​ Table border color (Default = "​ECECEC"​)
 +color_text="​000000"​ #​ Color of text (Default = "​000000"​)
 +color_textpercent="​606060"​ #​ Color of text for percent values (Default = "​606060"​)
 +color_titletext="​000000"​ #​ Color of text title within colored Title Rows (Default = "​000000"​)
 +color_weekend="​EAEAEA"​ #​ Color for week-end days (Default = "​EAEAEA"​)
 +color_link="​0011BB"​ #​ Color of HTML links (Default = "​0011BB"​)
 +color_hover="​605040"​ #​ Color of HTML on-mouseover links (Default = "​605040"​) ​
 +color_u="​FFAA66"​ #​ Background color for number of unique visitors (Default = "​FFAA66"​)
 +color_v="​F4F090"​ #​ Background color for number of visites (Default = "​F4F090"​)
 +color_p="​4477DD"​ #​ Background color for number of pages (Default = "​4477DD"​)
 +color_h="​66DDEE"​ #​ Background color for number of hits (Default = "​66DDEE"​)
 +color_k="​2EA495"​ #​ Background color for number of bytes (Default = "​2EA495"​)
 +color_s="​8888DD"​ #​ Background color for number of search (Default = "​8888DD"​)
 +color_e="​CEC2E8"​ #​ Background color for number of entry pages (Default = "​CEC2E8"​)
 +color_x="​C1B2E2"​ #​ Background color for number of exit pages (Default = "​C1B2E2"​)
 +
 +
 +
 +#​-----------------------------------------------------------------------------
 +# PLUGINS
 +#​-----------------------------------------------------------------------------
 +
 +# Add here all plugins file you want to load.
 +# Plugin files must be .pm files stored in '​plugins'​ directory.
 +# Uncomment LoadPlugin lines to enable a plugin after checking that perl
 +# modules required by the plugin are installed.
 +
 +# Plugin: Tooltips
 +# Perl modules required: None
 +# Add some tooltips help on HTML report pages.
 +# Note that enabled this kind of help will increased HTML report pages size,
 +# so server load and bandwidth.
 +#
 +#​LoadPlugin="​tooltips"​
 +
 +# Plugin: DecodeUTFKeys
 +# Perl modules required: Encode and URI::Escape
 +# Allow AWStats to show correctly (in language charset) keywords/​keyphrases
 +# strings even if they were UTF8 coded by the referer search engine.
 +#
 +#​LoadPlugin="​decodeutfkeys"​
 +
 +# Plugin: IPv6
 +# Perl modules required: Net::IP and Net::DNS
 +# This plugin gives AWStats capability to make reverse DNS lookup on IPv6
 +# addresses.
 +# Note: If you are interesting in having country report, you should use the
 +# geoipfree or geoip plugin instead of enabled reverse DNS lookup.
 +#
 +#​LoadPlugin="​ipv6"​
 +
 +# Plugin: HashFiles
 +# Perl modules required: Storable
 +# AWStats DNS cache files are read/saved as native hash files. This increase
 +# DNS cache files loading speed, above all for very large web sites.
 +#
 +#​LoadPlugin="​hashfiles"​
 +
 +# Plugin: GeoIP
 +# Perl modules required: Geo::IP or Geo::​IP::​PurePerl (from Maxmind)
 +# Country chart is built from an Internet IP-Country database.
 +# This plugin is useless for intranet only log files.
 +# Note: You must choose between using this plugin (need Perl Geo::IP module ​
 +# from Maxmind, database more up to date) or the GeoIPfree plugin (need
 +# Perl Geo::IPfree module, database less up to date).
 +# This plugin reduces AWStats speed of 8% !
 +#
 +#​LoadPlugin="​geoip GEOIP_STANDARD"​
 +
 +# Plugin: GeoIPfree
 +# Perl modules required: Geo::IPfree version 0.2+ (from Graciliano M.P.)
 +# Country chart is built from an Internet IP-Country database.
 +# This plugin is useless for intranet only log files.
 +# Note: You must choose between using this plugin (need Perl Geo::IPfree
 +# module, database less up to date) or the GeoIP plugin (need Perl Geo::IP
 +# module from Maxmind, database more up to date).
 +# Note: Activestate provide a corrupted version of Geo::IPfree 0.2 Perl
 +# module, so install it from elsewhere (from www.cpan.org for example).
 +# This plugin reduces AWStats speed of 10% !
 +#
 +#​LoadPlugin="​geoipfree"​
 +
 +# Plugin: GeoIP_Region_Maxmind
 +# Perl modules required: Geo::IP (from Maxmind)
 +# This plugin add a chart of hits by regions. Only regions for US and 
 +# Canada can be detected.
 +# Note: This plugin need Maxmind GeoIP Perl module AND the region database.
 +# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
 +# on Windows but it works great on Linux with default Perl.
 +# You need to purchase a license from Maxmind to get/use the Region database.
 +# This plugin reduces AWStats speed.
 +#
 +#​LoadPlugin="​geoip_region_maxmind GEOIP_STANDARD /​pathto/​GeoIPRegion.dat"​
 +
 +# Plugin: GeoIP_City_Maxmind
 +# Perl modules required: Geo::IP (from Maxmind)
 +# This plugin add a chart of hits by cities.
 +# Note: This plugin need Maxmind GeoIP Perl module AND the city database.
 +# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
 +# on Windows but it works great on Linux with default Perl.
 +# You need to purchase a license from Maxmind to get/use the City database.
 +# This plugin reduces AWStats speed.
 +#
 +#​LoadPlugin="​geoip_city_maxmind GEOIP_STANDARD /​pathto/​GeoIPCity.dat"​
 +
 +# Plugin: GeoIP_ISP_Maxmind
 +# Perl modules required: Geo::IP (from Maxmind)
 +# This plugin add a chart of hits by ISP.
 +# Note: This plugin need Maxmind GeoIP Perl module AND the ISP database.
 +# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
 +# on Windows but it works great on Linux with default Perl.
 +# You need to purchase a license from Maxmind to get/use the ISP database.
 +# This plugin reduces AWStats speed.
 +#
 +#​LoadPlugin="​geoip_isp_maxmind GEOIP_STANDARD /​pathto/​GeoIPISP.dat"​
 +
 +# Plugin: GeoIP_Org_Maxmind
 +# Perl modules required: Geo::IP (from Maxmind)
 +# This plugin add a chart of hits by Organization name
 +# Note: This plugin need Maxmind GeoIP Perl module AND the Org database.
 +# Note: I get some problem with Maxmind Geo::IP Perl module with ActiveState
 +# on Windows but it works great on Linux with default Perl.
 +# You need to purchase a license from Maxmind to get/use the Org database.
 +# This plugin reduces AWStats speed.
 +#
 +#​LoadPlugin="​geoip_org_maxmind GEOIP_STANDARD /​pathto/​GeoIPOrg.dat"​
 +
 +# Plugin: UserInfo
 +# Perl modules required: None
 +# Add a text (Firtname, Lastname, Office Department, ...) in authenticated user
 +# reports for each login value.
 +# A text file called userinfo.myconfig.txt,​ with two fields (first is login,
 +# second is text to show, separated by a tab char) must be created in DirData
 +# directory.
 +#
 +#​LoadPlugin="​userinfo"​
 +
 +# Plugin: HostInfo
 +# Perl modules required: Net::XWhois
 +# Add a column into host chart with a link to open a popup window that shows
 +# info on host (like whois records).
 +#
 +#​LoadPlugin="​hostinfo"​
 +
 +# Plugin: ClusterInfo
 +# Perl modules required: None
 +# Add a text (for example a full hostname) in cluster reports for each cluster
 +# number.
 +# A text file called clusterinfo.myconfig.txt,​ with two fields (first is
 +# cluster number, second is text to show) separated by a tab char. must be
 +# created into DirData directory.
 +# Note this plugin is useless if ShowClusterStats is set to 0 or if you don't
 +# use a personalized log format that contains %cluster tag.
 +#
 +#​LoadPlugin="​clusterinfo"​
 +
 +# Plugin: UrlAliases
 +# Perl modules required: None
 +# Add a text (Page title, description...) in URL reports before URL value.
 +# A text file called urlalias.myconfig.txt,​ with two fields (first is URL,
 +# second is text to show, separated by a tab char) must be created into
 +# DirData directory.
 +#
 +#​LoadPlugin="​urlalias"​
 +
 +# Plugin: TimeHiRes
 +# Perl modules required: Time::HiRes (if Perl < 5.8)
 +# Time reported by -showsteps option is in millisecond. For debug purpose.
 +#
 +#​LoadPlugin="​timehires"​
 +
 +# Plugin: TimeZone
 +# Perl modules required: Time::Local
 +# Allow AWStats to correct a bad timezone for user of some IIS that use
 +# GMT date in its log instead of local server time.
 +# This module is useless for Apache and most IIS version.
 +# This plugin reduces AWStats speed of 40% !!!!!!!
 +#
 +#​LoadPlugin="​timezone +2"
 +
 +# Plugin: Rawlog
 +# Perl modules required: None
 +# This plugin adds a form in AWStats main page to allow users to see raw
 +# content of current log files. A filter is also available.
 +#
 +#​LoadPlugin="​rawlog"​
 +
 +# Plugin: GraphApplet
 +# Perl modules required: None
 +# Supported charts are built by a 3D graphic applet.
 +#
 +#​LoadPlugin="​graphapplet /​awstatsclasses"​ #​ EXPERIMENTAL FEATURE
 +
 +
 +
 +#​-----------------------------------------------------------------------------
 +# EXTRA SECTIONS
 +#​-----------------------------------------------------------------------------
 +
 +# You can define your own charts, you choose here what are rows and columns
 +# keys. This feature is particularly usefull for marketing purpose, tracking
 +# products orders for example.
 +# For this, edit all parameters of Extra section. Each set of parameter is a
 +# different chart. For several charts, duplicate section changing the number.
 +# Note: Each Extra section reduces AWStats speed by 8%.
 +#
 +# WARNING: A wrong setup of Extra section might result in too large arrays
 +# that will consume all your memory, making AWStats unusable after several
 +# updates, so be sure to setup it correctly.
 +# In most cases, you don't need this feature.
 +#
 +# ExtraSectionNameX is title of your personalized chart.
 +# ExtraSectionCodeFilterX is list of codes the record code field must match.
 +#   Put an empty string for no test on code.
 +# ExtraSectionConditionX are conditions you can use to count or not the hit,
 +#   Use one of the field condition (URL,​QUERY_STRING,​REFERER,​UA,​HOST,​extraX)
 +#   and a regex to match, after a coma. Use "​||"​ for "​OR"​.
 +# ExtraSectionFirstColumnTitleX is the first column title of the chart.
 +# ExtraSectionFirstColumnValuesX is a string to tell AWStats which field to
 +#   ​extract value from (URL,​QUERY_STRING,​REFERER,​UA,​HOST,​extraX)
 +#   and how to extract the value (using regex syntax). Each different value
 +#   found will appear in first column of report on a different row. Be sure
 +#   that list of different possible values will not grow indefinitely.
 +# ExtraSectionFirstColumnFormatX is the string used to write value.
 +# ExtraSectionStatTypesX are things you want to count. You can use standard
 +#   code letters (P for pages,H for hits,B for bandwidth,L for last access).
 +# ExtraSectionAddAverageRowX add a row at bottom of chart with average values.
 +# ExtraSectionAddSumRowX add a row at bottom of chart with sum values.
 +# MaxNbOfExtraX is maximum number of rows shown in chart.
 +# MinHitExtraX is minimum number of hits required to be shown in chart.
 +#
 +
 +# Example to report the 20 products the most ordered by "​order.cgi"​ script
 +#​ExtraSectionName1="​Product orders"​
 +#​ExtraSectionCodeFilter1="​200 304"
 +#​ExtraSectionCondition1="​URL,​\/​cgi\-bin\/​order\.cgi||URL,​\/​cgi\-bin\/​order2\.cgi"​
 +#​ExtraSectionFirstColumnTitle1="​Product ID"
 +#​ExtraSectionFirstColumnValues1="​QUERY_STRING,​productid=([^&​]+)"​
 +#​ExtraSectionFirstColumnFormat1="​%s"​
 +#​ExtraSectionStatTypes1=PL
 +#​ExtraSectionAddAverageRow1=0
 +#​ExtraSectionAddSumRow1=1
 +#​MaxNbOfExtra1=20
 +#​MinHitExtra1=1
 +
 +
 +# There is also a global parameter ExtraTrackedRowsLimit that limit the
 +# number of possible rows an ExtraSection can report. This parameter is
 +# here to protect too much memory use when you make a bad setup in your
 +# ExtraSection. It applies to all ExtraSection independently meaning that
 +# none ExtraSection can report more rows than value defined by ExtraTrackedRowsLimit.
 +# If you know an ExtraSection will report more rows than its value, you should
 +# increase this parameter or AWStats will stop with an error.
 +# Example: 2000
 +# Default: 500
 +#
 +ExtraTrackedRowsLimit=500
 +
 +
 +#​-----------------------------------------------------------------------------
 +# INCLUDES
 +#​-----------------------------------------------------------------------------
 +
 +# You can include other config files using the directive with the name of the
 +# config file.
 +# This is particularly usefull for users who have a lot of virtual servers, so
 +# a lot of config files and want to maintain common values in only one file.
 +# Note that when a variable is defined both in a config file and in an
 +# included file, AWStats will use the last value read for parameters that
 +# contains one value and AWStats will concat all values from both files for
 +# parameters that are lists of value.
 +#
 +
 +#Include ""​
 +
 +</​code>​
  
 ==== Understanding Awstas ==== ==== Understanding Awstas ====
awstats.1299901225.txt.gz ยท Last modified: 2011/03/12 03:40 by k2patel