User Tools

Site Tools


solaris

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
solaris [2018/10/26 18:55]
k2patel [Issue connecting ssh]
solaris [2020/08/10 02:35] (current)
Line 10: Line 10:
  
 ==== Disk issue ==== ==== Disk issue ====
 +So on nexenta one of our disk failed and require to be replace.\\
 +Dell sent us lager drive than original drive.\\
 +
 +PERC required to clear managed cache, once it is cleared i was able to create new VD for new drive.\\
 +While creating VD please make sure you choose the size same as working VD.\\
 +It is required when you copy the slice from working drive, else it will error.\\
 +FIXME '​Partition 0 not aligned on cylinder boundary'​.\\
 +There are way to add larger size but i took the fastest route after so many problems.\\
 +
 +After adding new drive there are certain steps i had to do before i can add it to the syspool.\\
 +
 +First clear and scan all the drives on box.
 +<code bash>
 +devfsadm -C -c disk -v
 +devfsadm -c disk -v
 +</​code>​
 +
 +Check if your newly added drives added.
 +<code bash>
 +echo |format | head -10
 +</​code>​
 +:!:You can ignore using head, mine was c0t0d0 which was fist in the list.
 +
 +Fdisk new drive, but some time it error '​Partition 0 of the disk has an incorrect offset'​.\\
 +I had to do it multiple times.\\
 +<code bash>
 +pfexec fdisk /​dev/​rdsk/​c0t0d0s0
 +</​code>​
 +
 +Now its time to replicate slices.
 +<code bash>
 +prtvtoc /​dev/​dsk/​c0t1d0s0 |fmthard -s - /​dev/​rdsk/​c0t0d0s0
 +</​code>​
 +
 +Now attache the drive to zpool mirror, it is require to specify existing mirror drive as source.\\
 +<code bash>
 +zpool attach -f syspool c0t1d0s0 c0t0d0s0
 +</​code>​
 +
 +It should tell you to run installgrub.
 +<code bash>
 +installgrub /​boot/​grub/​stage1 /​boot/​grub/​stage2 /​dev/​rdsk/​c0t0d0s0
 +</​code>​
 +
 +Wait for resilvering before you reboot the server.
 +
  
solaris.txt ยท Last modified: 2020/08/10 02:35 (external edit)