Differences

This shows you the differences between two versions of the page.

--- webalizer [2011/03/12 03:49]
k2patel created
+++ webalizer [2020/08/10 02:35]
@@ Line 1: / Line 1: @@
-====== Webalizer ======
-==== Installation Linux ====
-<code text>
-Log rotate - /etc/webstat/statrotate
-/www/logs/*access.log {
-        monthly
-	size 20M
-        missingok
-        notifempty
-        compress
-        postrotate
-        /www/apache/bin/apachectl restart > /dev/null
-        endscript
-}
-Stats - script - /usr/local/bin/statsupdate.sh
-#!/bin/bash
-user_home="/usr/www/virtual/spicy"
-for i in `ls /usr/www/virtual/spicy | grep www`;
-do
-if [ -d $user_home/$i/stats ]
-then
-        if [ -s $user_home/$i/stats/webalizer.conf ]
-        then
-                grep -q $i $user_home/$i/stats/webalizer.conf
-                if [ $? -ne 0 ]; then
-                cp /etc/webstat/webalizer.conf.tmpl $user_home/$i/stats/webalizer.conf
-                /usr/bin/perl -pi -e "s/#repl_DOM/$i/g" $user_home/$i/stats/webalizer.conf
-                fi
-                /usr/bin/flock --timeout=0 /tmp/webalizer.lock /usr/local/bin/webalizer -c $user_home/$i/stats/webalizer.conf
-        else
-                cp /etc/webstat/webalizer.conf.tmpl $user_home/$i/stats/webalizer.conf
-                /usr/bin/perl -pi -e "s/#repl_DOM/$i/g" $user_home/$i/stats/webalizer.conf
-                /usr/bin/flock --timeout=0 /tmp/webalizer.lock /usr/local/bin/webalizer -c $user_home/$i/stats/webalizer.conf
-        fi
-else
-        mkdir $user_home/$i/stats
-        cp /etc/webstat/webalizer.conf.tmpl $user_home/$i/stats/webalizer.conf
-        /usr/bin/perl -pi -e "s/#repl_DOM/$i/g" $user_home/$i/stats/webalizer.conf
-        /usr/bin/flock --timeout=0 /tmp/webalizer.lock /usr/local/bin/webalizer -c $user_home/$i/stats/webalizer.conf
-fi
-done
-/usr/bin/flock --timeout=0 /tmp/webalizer.lock /usr/sbin/logrotate /etc/webstat/statrotate
-stats template -- /etc/webstat/webalizer.conf.tmpl
-#
-# Sample Webalizer configuration file
-# Copyright 1997-2008 by Bradford L. Barrett
-#
-# Distributed under the GNU General Public License.  See the
-# files "Copyright" and "COPYING" provided with the webalizer
-# distribution for additional information.
-#
-# This is a sample configuration file for the Webalizer (ver 2.20)
-# Lines starting with pound signs '#' are comment lines and are
-# ignored.  Blank lines are skipped as well.  Other lines are considered
-# as configuration lines, and have the form "ConfigOption  Value" where
-# ConfigOption is a valid configuration keyword, and Value is the value
-# to assign that configuration option.  Invalid keyword/values are
-# ignored, with appropriate warnings being displayed.  There must be
-# at least one space or tab between the keyword and its value.
-#
-# As of version 0.98, The Webalizer will look for a 'default' configuration
-# file named "webalizer.conf" in the current directory, and if not found
-# there, will look for "/etc/webalizer.conf".
-# LogFile defines the web server log file to use.  If not specified
-# here or on on the command line, input will default to STDIN.  If
-# the log filename ends in '.gz' (a gzip compressed file), or '.bz2'
-# (bzip2 compressed file), it will be decompressed on the fly as it
-# is being read.
-LogFile        /www/logs/#repl_DOM-access.log
-# LogType defines the log type being processed.  Normally, the Webalizer
-# expects a CLF or Combined web server log as input.  Using this option,
-# you can process ftp logs (xferlog as produced by wu-ftp and others),
-# Squid native logs or W3C extended format web logs. Values can be 'clf',
-# 'ftp', 'squid' or 'w3c'.  The default is 'clf'.
-LogType clf
-# OutputDir is where you want to put the output files.  This should
-# should be a full path name, however relative ones might work as well.
-# If no output directory is specified, the current directory will be used.
-OutputDir      /www/virtual/spicy/#repl_DOM/stats
-# HistoryName allows you to specify the name of the history file produced
-# by the Webalizer.  The history file keeps the data for previous months,
-# and is used for generating the main HTML page (index.html). The default
-# is a file named "webalizer.hist", stored in the output directory being
-# used.  The name can include a path, which will be relative to the output
-# directory unless absolute (starts with a leading '/').
-HistoryName     webalizer.hist
-# Incremental processing allows multiple partial log files to be used
-# instead of one huge one.  Useful for large sites that have to rotate
-# their log files more than once a month.  The Webalizer will save its
-# internal state before exiting, and restore it the next time run, in
-# order to continue processing where it left off.  This mode also causes
-# The Webalizer to scan for and ignore duplicate records (records already
-# processed by a previous run).  See the README file for additional
-# information.  The value may be 'yes' or 'no', with a default of 'no'.
-# The file 'webalizer.current' is used to store the current state data,
-# and is located in the output directory of the program (unless changed
-# with the IncrementalName option below).  Please read at least the section
-# on Incremental processing in the README file before you enable this option.
-Incremental     yes
-# IncrementalName allows you to specify the filename for saving the
-# incremental data in.  It is similar to the HistoryName option where the
-# name is relative to the specified output directory, unless an absolute
-# filename is specified.  The default is a file named "webalizer.current"
-# kept in the normal output directory.  If you don't specify "Incremental"
-# as 'yes' then this option has no meaning.
-IncrementalName webalizer.current
-# ReportTitle is the text to display as the title.  The hostname
-# (unless blank) is appended to the end of this string (seperated with
-# a space) to generate the final full title string.
-# Default is (for english) "Usage Statistics for".
-ReportTitle    Usage Statistics for
-# HostName defines the hostname for the report.  This is used in
-# the title, and is prepended to the URL table items.  This allows
-# clicking on URLs in the report to go to the proper location in
-# the event you are running the report on a 'virtual' web server,
-# or for a server different than the one the report resides on.
-# If not specified here, or on the command line, webalizer will
-# try to get the hostname via a uname system call.  If that fails,
-# it will default to "localhost".
-HostName        #repl_DOM
-# HTMLExtension allows you to specify the filename extension to use
-# for generated HTML pages.  Normally, this defaults to "html", but
-# can be changed for sites who need it (like for PHP embeded pages).
-HTMLExtension  html
-# PageType lets you tell the Webalizer what types of URLs you
-# consider a 'page'.  Most people consider html and cgi documents
-# as pages, while not images and audio files.  If no types are
-# specified, defaults will be used ('htm*', 'cgi' and HTMLExtension
-# if different for web logs, 'txt' for ftp logs).
-PageType        htm*
-PageType        cgi
-PageType        phtml
-#PageType       php3
-#PageType       pl
-# PagePrefix allows all requests with a specified prefix to be
-# considered as 'pages'. If you want everything under /documents
-# to be treated as pages no matter what their extension is. Also
-# useful if you have cgi-scripts with PATH_INFO.
-#PagePrefix     /documents
-#PagePrefix     /mycgi/parameters
-# OmitPage lets you tell the Webalizer that certain URLs do not
-# contain any pages.  No URL matching an OmitPage value will be
-# counted as a page, even if it matches a PageType above or has
-# no extension (e.g., a directory).  They will still be counted
-# as a hit.
-#OmitPage       /render
-# UseHTTPS should be used if the analysis is being run on a
-# secure server, and links to urls should use 'https://' instead
-# of the default 'http://'.  If you need this, set it to 'yes'.
-# Default is 'no'.  This only changes the behaviour of the 'Top
-# URLs' table.
-UseHTTPS       no
-# HTAccess allows the generation of a default .htaccess file in the
-# output directory.  If enabled, a default .htaccess file will be
-# created (with a single "DirectoryIndex" directive), unless one
-# already exists.  Values may be 'yes' or 'no', with 'no'
-# being the default (don't write .htaccess files).
-#HTAccess       no
-# StripCGI determines if URL CGI variables should be striped or not.
-# Historically, the Webalizer stripped all CGI variables from the end
-# of URLs to improve accuracy.  Some sites may prefer to keep the CGI
-# variables in place, particularly those with highly dynamic pages.
-# Values may be 'yes' or 'no', with the default being 'yes'.
-#StripCGI       yes
-# The TrimSquidURL option only has effect on squid type log files.
-# When analyzing a squid log, it is usually desirable to have less
-# granularity on the URLs.  TrimSquidURL = n where n is a number > 0
-# causes all URLs to be truncated after the nth '/' after the http://
-# portion.  Setting TrimSquidURL to one (1) will cause all URLs to be
-# summarized by domain only.  The default is zero (0), which disables
-# any such truncation and preserve the URLs as they are in the log.
-# TrimSquidURL  0
-# DNSCache specifies the DNS cache filename to use for reverse DNS lookups.
-# This file must be specified if you wish to perform name lookups on any IP
-# addresses found in the log file.  If an absolute path is not given as
-# part of the filename (ie: starts with a leading '/'), then the name is
-# relative to the default output directory.  See the DNS.README file for
-# additional information.
-#DNSCache       dns_cache.db
-# DNSChildren allows you to specify how many "children" processes are
-# run to perform DNS lookups to create or update the DNS cache file.
-# If a number is specified, the DNS cache file will be created/updated
-# each time the Webalizer is run, immediately prior to normal processing,
-# by running the specified number of "children" processes to perform
-# DNS lookups.  If used, the DNS cache filename MUST be specified as
-# well.  The default value is zero (0), which disables DNS cache file
-# creation/updates at run time.  The number of children processes to
-# run may be anywhere from 1 to 100, however a large number may effect
-# normal system operations.  Reasonable values should be between 5 and
-# 20.  See the DNS.README file for additional information.
-#DNSChildren    0
-# CacheIPs allows unresolved IP addresses to be cached in the DNS
-# database.  Normally, only resolved addresses are saved.  At some
-# sites, particularly those with a large number of unresolvable IP
-# addresses visiting, it may be useful to enable this feature so
-# those addresses are not constantly looked up each time the program
-# is run.  Values can be 'yes' or 'no', with 'no' being the default.
-#CacheIPs       no
-# CacheTTL specifies the time to live (TTL) value for cached DNS
-# entries, in days.  This value may be anywhere between 1 and 100
-# with the default being 7 days (1 week).
-#CacheTTL       7
-# The GeoDB option enables or disabled the use of the native
-# Webalizer GeoDB geolocation services.  This is the preferred
-# geolocation option.  Values may be 'yes' or 'no', with 'no'
-# being the default.
-#GeoDB          no
-# GeoDBDatabase specifies an alternate database to use.  The
-# default database is /usr/share/GeoDB/GeoDB.dat (however the
-# path may be changed at compile time; use the -vV command
-# line option to determine where).  If a different database is
-# to be used, it may be specified here.  The name is relative
-# to the output directory being used unless an absolute name
-# (ie: starts with a leading '/') is specified.
-#GeoDBDatabase  /usr/share/GeoDB/GeoDB.dat
-# The GeoIP option enables or disables the use of geolocation
-# services provided by the GeoIP library (http://www.maxmind.com),
-# if available.  Values may be 'yes' or 'no, with 'no' being the
-# default.  Note: if GeoDB is enabled, then this option will have
-# no effect (GeoDB will be used regardless of this setting).
-GeoIP           yes
-# GeoIPDatabase specifies an alternate database filename to use by the
-# GeoIP library.  If an absolute path is not given as part of the name
-# (ie: starts with a leading '/'), then the name is relative to the
-# default output directory. This option should not normally be needed.
-GeoIPDatabase   /usr/share/GeoIP/GeoIP.dat
-# HTMLPre defines HTML code to insert at the very beginning of the
-# file.  Default is the DOCTYPE line shown below.  Max line length
-# is 80 characters, so use multiple HTMLPre lines if you need more.
-HTMLPre <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-# HTMLHead defines HTML code to insert within the <HEAD></HEAD>
-# block, immediately after the <TITLE> line.  Maximum line length
-# is 80 characters, so use multiple lines if needed.
-HTMLHead <META NAME="author" CONTENT="The Webalizer">
-# HTMLBody defined the HTML code to be inserted, starting with the
-# <BODY> tag.  If not specified, the default is shown below.  If
-# used, you MUST include your own <BODY> tag as the first line.
-# Maximum line length is 80 char, use multiple lines if needed.
-HTMLBody <BODY BGCOLOR="#E8E8E8" TEXT="#000000" LINK="#0000FF" VLINK="#FF0000">
-# HTMLPost defines the HTML code to insert immediately before the
-# first <HR> on the document, which is just after the title and
-# "summary period"-"Generated on:" lines.  If anything, this should
-# be used to clean up in case an image was inserted with HTMLBody.
-# As with HTMLHead, you can define as many of these as you want and
-# they will be inserted in the output stream in order of apperance.
-# Max string size is 80 characters.  Use multiple lines if you need to.
-HTMLPost        <BR CLEAR="all">
-# HTMLTail defines the HTML code to insert at the bottom of each
-# HTML document, usually to include a link back to your home
-# page or insert a small graphic.  It is inserted as a table
-# data element (ie: <TD> your code here </TD>) and is right
-# alligned with the page.  Max string size is 80 characters.
-HTMLTail <IMG SRC="msfree.png" ALT="100% Micro$oft free!">
-# HTMLEnd defines the HTML code to add at the very end of the
-# generated files.  It defaults to what is shown below.  If
-# used, you MUST specify the </BODY> and </HTML> closing tags
-# as the last lines.  Max string length is 80 characters.
-HTMLEnd </BODY></HTML>
-# The LinkReferrer option determines if entries in the referrer table
-# should be plain text or a HTML link to the referrer.  Values can be
-# either 'yes' or 'no', with 'no' being the default.
-LinkReferrer    yes
-# The Quiet option suppresses output messages... Useful when run
-# as a cron job to prevent bogus e-mails.  Values can be either
-# "yes" or "no".  Default is "no".  Note: this does not suppress
-# warnings and errors (which are printed to stderr).
-Quiet           yes
-# ReallyQuiet will supress all messages including errors and
-# warnings.  Values can be 'yes' or 'no' with 'no' being the
-# default.  If 'yes' is used here, it cannot be overriden from
-# the command line, so use with caution.  A value of 'no' has
-# no effect.
-ReallyQuiet     no
-# TimeMe allows you to force the display of timing information
-# at the end of processing.  A value of 'yes' will force the
-# timing information to be displayed.  A value of 'no' has no
-# effect.
-TimeMe          no
-# GMTTime allows reports to show GMT (UTC) time instead of local
-# time.  Default is to display the time the report was generated
-# in the timezone of the local machine, such as EDT or PST.  This
-# keyword allows you to have times displayed in UTC instead.  Use
-# only if you really have a good reason, since it will probably
-# screw up the reporting periods by however many hours your local
-# time zone is off of GMT.
-GMTTime no
-# Debug prints additional information for error messages.  This
-# will cause webalizer to dump bad records/fields instead of just
-# telling you it found a bad one.   As usual, the value can be
-# either "yes" or "no".  The default is "no".  It shouldn't be
-# needed unless you start getting a lot of Warning or Error
-# messages and want to see why.  (Note: warning and error messages
-# are printed to stderr, not stdout like normal messages).
-Debug           no
-# FoldSeqErr forces the Webalizer to ignore sequence errors.
-# This is useful for Netscape and other web servers that cache
-# the writing of log records and do not guarentee that they
-# will be in chronological order.  The use of the FoldSeqErr
-# option will cause out of sequence log records to be treated
-# as if they had the same time stamp as the last valid record.
-# Default is to ignore out of sequence log records.  The use
-# of this feature is strongly discouraged and rarely needed.
-# (the webalizer already compensates for up to 60 minutes of
-# difference between records).
-FoldSeqErr      no
-# VisitTimeout allows you to set the default timeout for a visit
-# (sometimes called a 'session').  The default is 30 minutes,
-# which should be fine for most sites.
-# Visits are determined by looking at the time of the current
-# request, and the time of the last request from the site.  If
-# the time difference is greater than the VisitTimeout value, it
-# is considered a new visit, and visit totals are incremented.
-# Value is the number of seconds to timeout (default=1800=30min)
-VisitTimeout    1800
-# IgnoreHist shouldn't be used in a config file, but it is here
-# just because it might be usefull in certain situations.  If the
-# history file is ignored, the main "index.html" file will only
-# report on the current log files contents.  Usefull only when you
-# want to reproduce the reports from scratch.  USE WITH CAUTION!
-# Valid values are "yes" or "no".  Default is "no".
-IgnoreHist      no
-# IgnoreState also shouldn't be used, but is here anyway.  It is
-# similar to the IgnoreHist option, but for the incremental data
-# file.  If this is set to 'yes', any existing incrememtal data
-# will be ignored and a new data file will be written at the end
-# of processing.  USE WITH CAUTION.  By ignoring an existing
-# incremental data file, all previous processing for the current
-# month will be lost, and those logs must be re-processed.
-# Valid values are "yes" or "no".  Default is "no".
-IgnoreState     no
-# CountryGraph allows the usage by country graph to be disabled.
-# Values can be 'yes' or 'no', default is 'yes'.
-CountryGraph    yes
-# CountryFlags allows flags to be displayed in the top country
-# table in monthly reports.  Values can be 'yes' or 'no', with
-# the default being 'no'.
-#CountryFlags   no
-# FlagDir specifies the location of flag graphics which will be
-# used in the top country table.  If not specified, the default
-# is to look in the 'flags' directory directly under the output
-# directory being used for the reports.  If this option is used,
-# the display of flag graphics will be enabled by default.
-#FlagDir        flags
-# DailyGraph and DailyStats allows the daily statistics graph
-# and statistics table to be disabled (not displayed).  Values
-# may be "yes" or "no". Default is "yes".
-DailyGraph      yes
-DailyStats      yes
-# HourlyGraph and HourlyStats allows the hourly statistics graph
-# and statistics table to be disabled (not displayed).  Values
-# may be "yes" or "no". Default is "yes".
-HourlyGraph     yes
-HourlyStats     yes
-# GraphLegend allows the color coded legends to be turned on or off
-# in the graphs.  The default is for them to be displayed.  This only
-# toggles the color coded legends, the other legends are not changed.
-# If you think they are hideous and ugly, say 'no' here :)
-GraphLegend     yes
-# GraphLines allows you to have index lines drawn behind the graphs.
-# I personally am not crazy about them, but a lot of people requested
-# them and they weren't a big deal to add.  The number represents the
-# number of lines you want displayed.  Default is 2, you can disable
-# the lines by using a value of zero ('0').  [max is 20]
-# Note, due to rounding errors, some values don't work quite right.
-# The lower the better, with 1,2,3,4,6 and 10 producing nice results.
-GraphLines      2
-# IndexMonths defines the number of months to display in the main index
-# (yearly summary) table.  Value can be between 12 and 120, with the
-# default being 12 months (1 year).
-IndexMonths     12
-# YearHeaders enables/disables the display of year headers in the main
-# index (yearly summary) table.  If enabled, year headers will be shown
-# when the table is displaying more than 16 months worth of data. Values
-# can be 'yes' or 'no', with 'yes' being the default.
-YearHeaders     yes
-# GraphMonths defines the number of months to display in the main index
-# (yearly summary) graph.  Value can be between 12 and 72 months, with
-# the default being 12 months.
-GraphMonths     12
-# The "Top" options below define the number of entries for each table.
-# Defaults are Sites=30, URLs=30, Referrers=30 and Agents=15, and
-# Countries=30. TopKSites and TopKURLs (by KByte tables) both default
-# to 10, as do the top entry/exit tables (TopEntry/TopExit).  The top
-# search strings and usernames default to 20.  Tables may be disabled
-# by using zero (0) for the value.
-TopSites        30
-TopKSites       10
-TopURLs         30
-TopKURLs        10
-TopReferrers    30
-TopAgents       15
-TopCountries    30
-TopEntry        10
-TopExit         10
-TopSearch       20
-TopUsers        20
-# The All* keywords allow the display of all URLs, Sites, Referrers
-# User Agents, Search Strings and Usernames.  If enabled, a seperate
-# HTML page will be created, and a link will be added to the bottom
-# of the appropriate "Top" table.  There are a couple of conditions
-# for this to occur..  First, there must be more items than will fit
-# in the "Top" table (otherwise it would just be duplicating what is
-# already displayed).  Second, the listing will only show those items
-# that are normally visable, which means it will not show any hidden
-# items.  Grouped entries will be listed first, followed by individual
-# items.  The value for these keywords can be either 'yes' or 'no',
-# with the default being 'no'.  Please be aware that these pages can
-# be quite large in size, particularly the sites page,  and seperate
-# pages are generated for each month, which can consume quite a lot
-# of disk space depending on the traffic to your site.
-AllSites        no
-AllURLs no
-AllReferrers    no
-AllAgents       no
-AllSearchStr    no
-AllUsers       no
-# The Webalizer normally strips the string 'index.' off the end of
-# URLs in order to consolidate URL totals.  For example, the URL
-# /somedir/index.html is turned into /somedir/ which is really the
-# same URL.  This option allows you to specify additional strings
-# to treat in the same way.  You don't need to specify 'index.' as
-# it is always scanned for by The Webalizer, this option is just to
-# specify _additional_ strings if needed.  If you don't need any,
-# don't specify any as each string will be scanned for in EVERY
-# log record... A bunch of them will degrade performance.  Also,
-# the string is scanned for anywhere in the URL, so a string of
-# 'home' would turn the URL /somedir/homepages/brad/home.html into
-# just /somedir/ which is probably not what was intended.
-IndexAlias     home.htm
-#IndexAlias     homepage.htm
-# The DefaultIndex option is used to enable/disable the use of
-# "index." as the default index name to be stripped off the end of
-# a URL (as described above).  Most sites will not need to use this
-# option, but some may, such as those whose default index file name
-# is different, or those that use "index.php" or similar URLs in a
-# dynamic environment.  Values can be 'yes' or 'no', with the default
-# being 'yes'.  This option does not effect any names added using the
-# IndexAlias option, and those names will still function as described
-# regardless of this setting.
-#DefaultIndex   yes
-# The Hide*, Group* and Ignore* and Include* keywords allow you to
-# change the way Sites, URLs, Referrers, User Agents and Usernames
-# are manipulated.  The Ignore* keywords will cause The Webalizer to
-# completely ignore records as if they didn't exist (and thus not
-# counted in the main site totals).  The Hide* keywords will prevent
-# things from being displayed in the 'Top' tables, but will still be
-# counted in the main totals.  The Group* keywords allow grouping
-# similar objects as if they were one.  Grouped records are displayed
-# in the 'Top' tables and can optionally be displayed in BOLD and/or
-# shaded. Groups cannot be hidden, and are not counted in the main
-# totals. The Group* options do not, by default, hide all the items
-# that it matches.  If you want to hide the records that match (so just
-# the grouping record is displayed), follow with an identical Hide*
-# keyword with the same value.  (see example below)  In addition,
-# Group* keywords may have an optional label which will be displayed
-# instead of the keywords value.  The label should be seperated from
-# the value by at least one 'white-space' character, such as a space
-# or tab.  If the match string contains whitespace (spaces or tabs),
-# the string should be quoted with either single or double quotes.
-#
-# The value can have either a leading or trailing '*' wildcard
-# character.  If no wildcard is found, a match can occur anywhere
-# in the string. Given a string "www.yourmama.com", the values "your",
-# "*mama.com" and "www.your*" will all match.
-# Your own site should be hidden
-HideSite        *asianrules.com
-HideSite        localhost
-# Your own site gives most referrals
-HideReferrer    asianrules.com
-HideReferrer    #repl_DOM
-# This one hides non-referrers ("-" Direct requests)
-HideReferrer    Direct Request
-# Usually you want to hide these
-HideURL         *.gif
-HideURL         *.GIF
-HideURL         *.jpg
-HideURL         *.JPG
-HideURL         *.png
-HideURL         *.PNG
-HideURL         *.ra
-# Hiding agents is kind of futile
-HideAgent       RealPlayer
-# You can also hide based on authenticated username
-HideUser        root
-HideUser        admin
-# Grouping options
-GroupURL        /cgi-bin/*      CGI Scripts
-GroupURL        /images/*       Images
-GroupSite       *.aol.com
-GroupSite       *.compuserve.com
-GroupReferrer   yahoo.com/      Yahoo!
-GroupReferrer   excite.com/     Excite
-GroupReferrer   infoseek.com/   InfoSeek
-GroupReferrer   webcrawler.com/ WebCrawler
-GroupUser      root            Admin users
-GroupUser      admin           Admin users
-GroupUser      wheel           Admin users
-# The following is a great way to get an overall total
-# for browsers, and not display all the detail records.
-# (You should use MangleAgent to refine further...)
-GroupAgent      Opera/          Opera
-#HideAgent      Opera/
-GroupAgent      "MSIE 7"        Microsoft Internet Exploder 7
-#HideAgent      MSIE 7
-GroupAgent      "MSIE 6"        Microsoft Internet Exploder 6
-#HideAgent      MSIE 6
-GroupAgent      "MSIE "         Older Microsoft Exploders
-#HideAgent      MSIE
-GroupAgent      Firefox/2.      Firefox 2
-#HideAgent      Firefox/2.
-GroupAgent      Firefox/1.      Firefox 1.x
-#HideAgent      Firefox/1.
-GroupAgent      Konqueror       Konqueror
-#HideAgent      Konqueror
-GroupAgent      Safari          Safari
-#HideAgent      Safari
-GroupAgent      Lynx*           Lynx
-#HideAgent      Lynx*
-GroupAgent      Wget/           WGet
-#HideAgent      Wget/
-GroupAgent      (compatible;    Other Mozilla Compatibles
-#HideAgent      (compatible;
-GroupAgent      Mozilla*        Mozilla/Netscape
-#HideAgent      Mozilla*
-# HideAllSites allows forcing individual sites to be hidden in the
-# report.  This is particularly useful when used in conjunction
-# with the "GroupDomain" feature, but could be useful in other
-# situations as well, such as when you only want to display grouped
-# sites (with the GroupSite keywords...).  The value for this
-# keyword can be either 'yes' or 'no', with 'no' the default,
-# allowing individual sites to be displayed.
-HideAllSites    no
-# The GroupDomains keyword allows you to group individual hostnames
-# into their respective domains.  The value specifies the level of
-# grouping to perform, and can be thought of as 'the number of dots'
-# that will be displayed.  For example, if a visiting host is named
-# cust1.tnt.mia.uu.net, a domain grouping of 1 will result in just
-# "uu.net" being displayed, while a 2 will result in "mia.uu.net".
-# The default value of zero disable this feature.  Domains will only
-# be grouped if they do not match any existing "GroupSite" records,
-# which allows overriding this feature with your own if desired.
-GroupDomains    0
-# The GroupShading allows grouped rows to be shaded in the report.
-# Useful if you have lots of groups and individual records that
-# intermingle in the report, and you want to diferentiate the group
-# records a little more.  Value can be 'yes' or 'no', with 'yes'
-# being the default.
-GroupShading    yes
-# GroupHighlight allows the group record to be displayed in BOLD.
-# Can be either 'yes' or 'no' with the default 'yes'.
-GroupHighlight  yes
-# The Ignore* keywords allow you to completely ignore log records based
-# on hostname, URL, user agent, referrer or username.  I hesitated in
-# adding these, since the Webalizer was designed to generate _accurate_
-# statistics about a web servers performance.  By choosing to ignore
-# records, the accuracy of reports become skewed, negating why I wrote
-# this program in the first place.  However, due to popular demand, here
-# they are.  Use the same as the Hide* keywords, where the value can have
-# a leading or trailing wildcard '*'.  Use at your own risk ;)  Please
-# remember, the use of these will MAKE YOUR STATS INACCURATE and you
-# should consider using an equivalent 'Hide*' keyword instead.
-#IgnoreSite     bad.site.net
-#IgnoreURL      /test*
-#IgnoreReferrer file:/*
-#IgnoreAgent    RealPlayer
-#IgnoreUser     root
-# The Include* keywords allow you to force the inclusion of log records
-# based on hostname, URL, user agent, referrer or username.  They take
-# precidence over the Ignore* keywords.  Note: Using Ignore/Include
-# combinations to selectivly process parts of a web site is _extremely
-# inefficent_!!! Avoid doing so if possible (ie: grep the records to a
-# seperate file if you really want that kind of report).
-# Example: Only show stats on Joe User's pages...
-#IgnoreURL      *
-#IncludeURL     ~joeuser*
-# Or based on an authenticated username
-#IgnoreUser     *
-#IncludeUser    someuser
-# The MangleAgents allows you to specify how much, if any, The Webalizer
-# should mangle user agent names.  This allows several levels of detail
-# to be produced when reporting user agent statistics.  There are six
-# levels that can be specified, which define different levels of detail
-# supression.  Level 5 shows only the browser name (MSIE or Mozilla)
-# and the major version number.  Level 4 adds the minor version number
-# (single decimal place).  Level 3 displays the minor version to two
-# decimal places.  Level 2 will add any sub-level designation (such
-# as Mozilla/3.01Gold or MSIE 3.0b).  Level 1 will attempt to also add
-# the system type if it is specified.  The default Level 0 displays the
-# full user agent field without modification and produces the greatest
-# amount of detail.  User agent names that can't be mangled will be
-# left unmodified.
-#MangleAgents    0
-# The SearchEngine keywords allow specification of search engines and
-# their query strings on the URL.  These are used to locate and report
-# what search strings are used to find your site.  The first word is
-# a substring to match in the referrer field that identifies the search
-# engine, and the second is the URL variable used by that search engine
-# to define it's search terms.
-SearchEngine    .google.        q=
-SearchEngine    yahoo.com       p=
-SearchEngine    altavista.com   q=
-SearchEngine   aolsearch.      query=
-SearchEngine   ask.co          q=
-SearchEngine    eureka.com      q=
-SearchEngine    lycos.com       query=
-SearchEngine    hotbot.com      MT=
-SearchEngine    msn.com         q=
-SearchEngine    infoseek.com    qt=
-SearchEngine    excite          search=
-SearchEngine    netscape.com    query=
-SearchEngine    mamma.com       query=
-SearchEngine    alltheweb.com   q=
-SearchEngine    northernlight.com  qr=
-# Normally, search strings are converted to lower case in order to
-# increase accuracy.  The SearchCaseI option allows them to maintain
-# case sensitivity, useful for some sites.  The value can be 'yes'
-# or 'no', with 'yes' (case insensitive) being the default.
-#SearchCaseI    yes
-# The Dump* keywords allow the dumping of Sites, URLs, Referrers
-# User Agents, Usernames and Search strings to seperate tab delimited
-# text files, suitable for import into most database or spreadsheet
-# programs.
-# DumpPath specifies the path to dump the files.  If not specified,
-# it will default to the current output directory.  Do not use a
-# trailing slash ('/').
-#DumpPath       /var/lib/httpd/logs
-# The DumpHeader keyword specifies if a header record should be
-# written to the file.  A header record is the first record of the
-# file, and contains the labels for each field written.  Normally,
-# files that are intended to be imported into a database system
-# will not need a header record, while spreadsheets usually do.
-# Value can be either 'yes' or 'no', with 'no' being the default.
-#DumpHeader     no
-# DumpExtension allow you to specify the dump filename extension
-# to use.  The default is "tab", but some programs are pickey about
-# the filenames they use, so you may change it here (for example,
-# some people may prefer to use "csv").
-#DumpExtension  tab
-# These control the dumping of each individual table.  The value
-# can be either 'yes' or 'no'.. the default is 'no'.
-#DumpSites      no
-#DumpURLs       no
-#DumpReferrers  no
-#DumpAgents     no
-#DumpUsers      no
-#DumpSearchStr  no
-# The custom graph colors are defined here. Declare them
-# in the standard hexadecimal way (as HTML, without the '#')
-# If none are given, you will get the standard default colors.
-#ColorHit       00805c
-#ColorFile      0040ff
-#ColorSite      ff8000
-#ColorKbyte     ff0000
-#ColorPage      00e0ff
-#ColorVisit     ffff00
-#ColorMisc      00e0ff
-#PieColor1      800080
-#PieColor2      80ffc0
-#PieColor3      ff00ff
-#PieColor4      ffc080
-# End of configuration file...  Have a nice day!
-</code>

Daily *Nix

User Tools

Site Tools

Differences

Page Tools