Daily *Nix

User Tools

Site Tools

Trace: • tw_cli
tw_cli

This is an old revision of the document!

Table of Contents

tw_cli

tw_cli is the CLI for monitoring and maintaining 3ware RAID controllers. It can be used for all maintenance operations that can be performed through the 3dmd daemon or the system BIOS.

Checking the status of controller, array or disk

| list controllers in the machine 
info
| list the disks on controller 1 and their grouping into RAID arrays 
info c1
| list the disks in RAID unit 2 and their status within the array. Useful to find out which disk is bad in a DEGRADED array. 
info c1 u2
| list the status of an individual disk 
info c1 p2
| for experts: show low-level error log output for the controller 
info c1 diag

Removing a disk

| remove disk p2 from c1 array
maint remove c1 p2

Re-detecting a disk

Rebuilding an array

Creating a RAID unit

Assigning a disk as a 'hot spare'

tw_cli.1279401593.txt.gz · Last modified: 2020/08/10 02:29 (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Run on Debian Driven by DokuWiki