Differences

This shows you the differences between two versions of the page.

--- rpm [2014/11/21 18:14] – [General RPM Command] k2patel
+++ rpm [2020/08/10 02:35] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== RPM ======
+* [[ Python packages to rpm ]]
 Package management system few tips / trick to build / modify / work with packages. \\
@@ Line 141: / Line 143: @@
 </code>
+==== Something i come across ====
+If you wanna override marco from OS you can define value at ''top'' of the spec file.
+<code bash>
+%define _mandir /usr/man
+</code>
 ==== Sample RPM ====
 <code bash | sample.spec>
@@ Line 232: / Line 239: @@
 [[http://rpm.org/wiki/Docs#PackagerDocumentation | RPM Official]]
+==== Scriptlets ====
+Normally, rpm has scriptlets inside the spec file that are
+ran at install time.  These are:
+<code bash>
+	%pre              - Run before rpm files are installed.
+	%post             - Run after rpm files are installed.
+	%preun            - Run before rpm files are erased.
+	%postun           - Run after rpm files are erased.
+ 	%triggerin        - Install trigger.
+	%triggerun        - uninstall trigger
+	%triggerpostun    - postuninstall trigger.
+</code>
+The scripts are normally bash scripts, but you can change the interpreter
+with the -p option.
+Also, as they are bash scripts you can call external scripts from these.
 ==== General RPM Command ====
@@ Line 838: / Line 862: @@
 Also see Packaging/RPMMacros and RPM Guide chapter 9.
 </code>
+==== Custom Built RPM ====
+[[http://rpm.k2patel.in|my repository]]